Advertisement
Table of Contents
- 1 2. Hyperterminal Is a Serial Communications Application that Is
- 2 In the Box…
- 3 Step 1A. Installing the Libero IDE and Coreconsole - Softconsole Tools
- 4 Step 1B. Check the Actel Website for the Latest Tools
- 5 Step 2. Installing the Cortex-M1 Enabled Fusion Development Kit Using the Install CD
- 6 Step 3. Powering up the Board
- 7 Step 4. Running the “Sample Design”
- Download this manual
2. Hyperterminal is a serial communications application that is
distributed with Windows. On the PC, navigate to "Start -> Programs
-> Accessories -> Communications -> Hyperterminal" to start
Hyperterminal. Create a new session, and connect using the COM
port from step 1. The other settings are: 57600, 8, None, 1, None.
3. Press and release switch SW3 on the M1AFS board to reset the
software and see the display of analog measurements on the
Hyperterminal window.
For additional information, please refer to the
Cortex-M1 Enabled Fusion
Development Kit User's Guide
For support please contact SoC Solutions at
support@socsolutions.com
For product updates, please register this product at
http://www.socsolutions.com/ProdRegistration.aspx
Copyright 2008 ©. All rights reserved. All logos and trademarks are property of the respective
companies.
Cortex-M1 Enabled Fusion
Development Kit
Quick Start Guide
USB Connector
(FlashPro3
Programmer)
USB / Serial
Connector
LEDs
Switches
In the box...
•
M1AFS Development Board
•
Install CD
•
Libero IDE (CD/DVD)
•
2 USB Cables
•
1 External 5-Volt Power Supply
M1AFS-DEV-KIT-SCS
M1AFS with
1Mbyte
16Mbyte
Cortex-M1 processor
SRAM
Flash
Version 1.1 March 2008
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Actel SOCSolutions Cortex-M1
Summary of Contents for Actel SOCSolutions Cortex-M1
- Page 1 Cortex-M1 Enabled Fusion 2. Hyperterminal is a serial communications application that is M1AFS-DEV-KIT-SCS Development Kit distributed with Windows. On the PC, navigate to “Start -> Programs -> Accessories -> Communications -> Hyperterminal” to start Hyperterminal. Create a new session, and connect using the COM Quick Start Guide port from step 1.
- Page 2 J2 connector illuminate. SoftConsole tools, please refer to the documentation supplied in the Libero IDE DVD case, on the DVD/CDs or go to the Actel website. Note: The PC will detect that new hardware is installed. The “add new hardware wizard” will take care of the USB driver installation. The wizard Step 2.
Need help?
Do you have a question about the SOCSolutions Cortex-M1 and is the answer not in the manual?
Questions and answers