H
After files are installed on
your PC, the Setup Wizard
will conclude. Click the
Online Registration button
to register this product or
the Exit button to close
the Setup Wizard
H
I
After you open the SKPYE
application on your PC,
the following screen will
appear. Select Allow this
application to use SKYPE
and click OK.
I
Congratulations! The Cordless
Internet Telephony Kit is
installed!
2
Before you use the Telephony Kit
Before you use the Cordless
Internet Telephony Kit, please
make sure you:
A
Have SKYPE installed and
running on your PC.
B
Have connected the
Telephony Kit properly
C
Have charged the hand-
set.
3
Important Safety Information
BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC
SAFETY PRECAUTIONS SHOUD ALWAYS BE FOLLOWED
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND
INJURY, INCLUDING THE FOLLOWING.
•
Read and follow all warnings and instructions marked
on the product.
•
Do not use this product near water, laundry tub, in a
wet basement, or near a swimming pool.
•
Do not place this product on an unstable table. The
product may fall and be damaged.
•
This product should never be placed near or over a
radiator or heat register.
•
This product should be operated only from the type of
power source indicated on the label.
•
Do not allow anything to rest on the power cord. Do not
locate this product where the cord will be abused by
persons walking on it.
•
Do not overload wall outlets and extension cords as
this can result in the risk of fire or electric shock.
•
Avoid using a telephone during an electrical storm.
There may be a remote risk of electric shock from
lightning.
•
Do not use this product to report a gas leak in the
vicinity of the leak.
•
Do not use this product near intensive care medical
equipment or by persons with pacemakers.
•
Due to the radio signals between base station and
handset, wearers of hearing aids may experience
interference in the form of a humming noise.
BATTERIES
•
Use only the battery type listed in the instruction
manual. Do not use lithium batteries or non-
rechargeable batteries that may damage the handset
and charger.
•
Do not dispose of the battery in a fire, as
they can explode.
•
Do not open or mutilate the battery.
Released electrolyte is corrosive and can
cause damage to the eyes or skin. It can
be toxic if swallowed.
•
Avoid contact with metal objects when
handling the battery. These objects could
short out the batteries or cause the
conductor to overheat resulting in burns.
•
Do not attempt to recharge the battery cell
by heating it. Sudden release of battery
electrolyte can cause burns or irritation to
the eyes or skin.
•
Observe the proper polarity, or direction, of
For additional information or troubleshooting
any battery. Reverse insertion of the
help, refer to the User Guide on the Setup CD-
battery cell can result in leakage or
ROM. You can also call or email for further
explosion.
support.
•
Remove the battery cells if you do not plan
24-hour Technical Support
to use the product for several months at a
time.
800-326-7114
(toll-free from US or Canada)
•
Discard any "dead" batteries because they
E-mail Support
are likely to leak into the product.
support@linksys.com
Website
•
Do not store this product or the battery in a
http://www.linksys.com or
high temperature area. Battery stored in a
http://support.linksys.com
freezer or refrigerator should be protected
RMA (Return Merchandise Authorization)
from condensation during storage and
http://www.linksys.com/support
defrosting. Battery should be stabilized at
room temperature before using.
FTP Site
ftp://ftp.linksys.com
•
Your battery is rechargeable and can be
Sales Information
recycled once it outlives its usefulness.
800-546-5797 (800-LINKSYS)
Depending upon your local and state law, it
might be illegal to dispose of this battery
into a municipal waste system. Check with
Linksys is a registered trademark or trademark of
your local solid waste company for more
Cisco Systems, Inc. and/or its affiliates in the U.S.
information on your recycling options for
and certain other countries. Copyright © 2005
the battery cells.
Cisco Systems, Inc. All rights reserved.
SAVE THESE INSTRUCTIONS
CIT200-QI-50722 KL