Linksys CIT400 Quick Installation

Package Contents
• Handset
• Two AAA NiMH batteries
• Charger
• Base Station
• Power Adapter for the Charger
• Power Adapter for the Base Station
• RJ-11 telephone line cord
• RJ-45 ethernet cable
Dual-Mode
TM
Internet Telephony Kit with Skype
Quick Installation
Model No.
Model No. CIT 400
1
Charging the Handset
IMPORTANT:
To use Skype you will need an available ethernet port. If you have traditional
phone service (landline), you will also need an available telephone wall jack.
A
Remove the cover of the
battery compartment.
B
Insert the two NiMH
rechargeable, AAA batteries
(included). Make sure the
polarities are correct. (The +
and - ends of the batteries
should be in the + and - slots
of the compartment.)
C
Slide the cover upward until it
snaps into place.
B
D
Plug the charger's power
adapter into an electrical
outlet. Place the handset on
the charger. For the initial
charge, let the batteries
charge for 14 hours before
using the handset. This
maximizes battery
performance and life.
E
Pick up the charged handset
to make a call. To power off
the handset, press the Power/
End Call key until you will see
the Skype menu. Scroll to
Switch Off. Press Select and the
D
phone will power off.
NOTE:
The handset may become warm
during the initial charge..
2
Connecting the Base Station
A
If you have a landline, connect
a RJ-11 telephone line cord
(included) to the LINE port of
the base station. Then connect
the other end to your
telephone wall jack. If only the
landline is connected you can
only make and receive calls
over the landline. A
B
Connect the Ethernet RJ-45
cable (included) to the
Ethernet port of the base
station. Then connect the other
end to a network Ethernet jack.
If only the Ethernet cable is
connected, you can only
make and receive Skype or
SkypeIn calls.
B
C
Connect the included power
adapter to the power port of
the base station. Then plug the
power adapter into an
electrical outlet.
C
3
3
First Time Phone Use
When you turn on the phone for the first
time, you will be asked to:
A
Select the language. If the
language you want does not
appear on-screen, scroll to find
the correct language and
press Select to confirm.
B
Review the agreement. Use the
navigation button to move up
or down. Read the agreement
and press Accept to proceed.
C
B
Set your country code. For the
phone to work correctly
according to your country's
standards, you must use the
code for the country you are
calling from. For example, the
U.S. and Canada use the
country code of 1. Press Clear
to make a correction. Press
Enter to confirm the country
code.
D
Set your area code. To be able
C
to return local, national or
international calls received on
the Landline, you must set your
area code. Your phone will
update the information and
reset itself.
E
Create a Skype Account or
sign in to your existing Skype
Account. Each Skype account
has a unique Skype Name with
a password. If your Skype
Name is the same as another
Skype user, it will not be
E
accepted. Your existing Skype
Name needs to be at least 6