Specifications; Before Operation; Attachments/Accessories; Performing Daily Maintenance - Toro eS3200DC 72V Operator's Manual

81cm
Hide thumbs Also See for eS3200DC 72V:
Table of Contents

Advertisement

Specifications

Note:
Specifications and design are subject to
change without notice.
Cutting width
Width
Length
Height
Weight
Charging time with 2.5 A
charger
Charging time with optional
10 A charger

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
81 cm (32 inches)
85 cm (33.4 inches)
200 cm (78.7 inches)
104 cm (40.9 inches)
164 kg (362 lb)
10 hours
3 hours
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Performing Daily
Maintenance
Before starting the machine each day, perform the
Each Use/Daily procedures listed in
Maintenance (page
Using the Safety-Interlock
System
WARNING
If the safety-interlock switches are
disconnected or damaged, the machine could
operate unexpectedly, causing personal
injury.
• Do not tamper with the interlock switches.
• Check the operation of the interlock
switches daily and replace any damaged
switches before operating the machine.
Understanding the
Safety-Interlock System
The safety-interlock system is designed to prevent the
machine from starting unless:
The blade-control switch (PTO) is disengaged.
The parking brake is disengaged.
You are seated in the operator's seat.
The drive-mode switch is in the F
N
position.
EUTRAL
The safety-interlock system also is designed to
prevent the mower blades from engaging unless the
drive-mode switch is in the F
Testing the Safety-Interlock
System
Test the safety-interlock system before you use the
machine each time. If the safety system does not
operate as described below, have an Authorized
Service Dealer repair the safety system immediately.
1.
Sit on the seat, engage the parking brake, move
the drive-mode switch to the F
17
Performing Daily
17).
ORWARD
position.
ORWARD
ORWARD
or
position,

Advertisement

Table of Contents
loading

This manual is also suitable for:

75501

Table of Contents