TECHWOOD TRF-7008 Instruction Manual page 4

Never move the appliance by pulling the cord. Make sure the
q
cord cannot get caught in any way.
Never wind the cord around the appliance and do not bend it
q
Ensure that the power cord does not come into contact with
q
hot parts of this unit.
Make sure the appliance has cooled down before cleaning
q
and storing it.
The temperature of accessible surfaces may be very high
q
when the appliance is operating. Never touch these parts, of
apparatus, to avoid burning itself.
Make sure the appliance never comes into contact with
q
flammable materials, such as curtains, cloth, etc...& the
power cord and plug do not come in contact with water.
Before cleaning, always unplug the appliance from the power
q
supply and let it cool down.
This appliance is not intended to be operated by means of an
q
external timer or separate remote-control system.
Always place the unit on a flat surface. Ensure, also, not to
q
cover the device and not to put anything on it.
Always remove the plug from the wall socket when the
q
appliance is not in use.
When using an extension lead always make sure that the
q
entire cable is unwound from the reel. Use solely CE
approved extension leads. Input power must be at least 16A,
250V, 3000W.
Incorrect operation and improper use can damage the
q
appliance and cause injury to the user.
This device, designed for home use, complies with standards
q
relating to this type of product.
The appliance must be used and rested on a table or flat &
q
stable surface.
The item must not be left unattended when it is connected to
q
main supply.
The item is not to be used, if it has been dropped or if there
q
are visible signs of damage.
4