Compact Disc Playback - LENCO SCD-24 Instruction Manual

FOR BETTER RECEPTION
NOTE : 1. FM stereo LED indicator lights if receive FM stereo broardcast and the MODE switch set on "FM STEREO".
2. When too much noise is heard during FM STEREO reception, set MODE switch to FM mono.
AFTER LISTENING
Set the FUNCTION selector to OFF.

COMPACT DISC PLAYBACK

1 . Set to CD
FUNCTION
2 . Open the CD door by pushing
CD Door Open / Close button.
TO INTERRUPT PLAYBACK
Press the Play/Pause
" PLAY " will be flashed.
Press the button again to resume playback.
PLAY
CD display
TO SKIP TO THE BEGINNING OF A TRACK
• Press either one of the
• Play/back resumes from the selected track.
• When the button is pressed once during play, the previous track starts again.
• When the button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
• Keep the or
and release the button as soon as you recognise the desired
passage. Then normal CD playback will resume from this point.
Unit will be automatically off at about 15 mins without any operation (in stop mode / CD door open).
After auto off, slide the FUNCTION selector to OFF position and then slide to RADIO / CD position for listening.
FM
CD
button and the symbol
skip buttons according to the desired skip direction.
button pressed during playback,
3. Insert a disc with the label side facing up.
4 . Close the CD door.
The disc will rotate and the total
tracks of the disc will show on
the display.
5. Press the Play / Pause
Track number " 01 " & " PLAY
be shown.
PLAY
CD display
TO STOP PLAYBACK
Press the STOP button and the display shows the total
tracks of the disc.
GB 3
button.
" will