Admin > Firmware Upgrade; Admin > Reboot; Admin > Factory Default - Linksys SLM2024 User Manual

Business series smart gigabit ethernet switch
Hide thumbs Also See for SLM2024:
Table of Contents

Advertisement

Chapter 4
Admin > Firmware Upgrade
Admin > Firmware Upgrade
The Firmware Upgrade screen allows you to download
firmware upgrade files from a TFTP server, or from your
computer via the HTTP interface.
Via TFTP
Select this to download from or upload to a
TFTP server. When you select this option, the following
fields are displayed.
UPGRADE
Select this option to upgrade the switch
from a file located on a TFTP server.
File Type
Select the type of file to download,
either Software Image or Boot Code.
TFTP Server
Enter the TFTP Server IP Address that
contains the source file to upgrade from.
File Name
Enter the name of the upgrade file on
the TFTP Server.
BACKUP
To back up the firmware to a TFTP server,
enter the TFTP server address.
TFTP Server
Enter the TFTP Server IP Address to
which the firmware file will be saved.
File Name
Enter the name of the file.
Via HTTP
Select this to download an upgrade file using
the HTTP interface. When you select this option, the
following field is displayed:
Source File
Enter the name and path of the file or
click Browse to locate the upgrade file.
Click Save Settings to begin the download or upload.
Business Series Smart Gigabit Ethernet Switch
Configuration Using the Web-based Utility
Admin > Reboot
The Reboot screen is used to reset the Switch. The current
configuration settings are automatically saved before the
Switch is rebooted.
Admin > Reboot
Click the Reboot button, then click OK to confirm.
Admin > Factory Default
The Factory Default screen allows network managers to
reset the Switch to the factory defaults shipped with the
switch. Restoring factory defaults results in erasing the
configuration file.
NOTE:
Restoring the factory defaults will erase
all of your current configuration settings. Before
you restore the factory defaults, you can save a
backup of your current configuration settings
from the Admin > Save Configuration screen..
Admin > Factory Default
Click Reset Default, then click OK to confirm and restart
the Switch.
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Slm2048Slm248gSlm224gSlm224pSlm248p

Table of Contents