Safety Decal Care; How To Install Safety Decals; Safety Labels - Farm Aid 500 Owner's Manual

SAFETY DECAL CARE:

 Keep safety decals and signs clean and legible at all times.
 Replace safety decals and signs that are missing or have become illegible.
 Safety decals or signs are available from your dealer or the Farm Aid
manufacturing plant.

HOW TO INSTALL SAFETY DECALS:

Be sure that the installation area is clean and dry. Decide on the exact position before
you remove the backing paper. Remove the smallest portion of the split backing paper.
Align the decal over the specified area and carefully press the exposed sticky backing in
place. Slowly peel back the remaining paper and carefully smooth the remaining portion
of the decal in place.

SAFETY LABELS:

KEY WORDS: The safety labels start with a key word. The key words used are:
DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in
serious injury or death.
WARNING: Indicates a potentially hazardous situation that, if not avoided, will result
in serious injury or death.
CAUTION: Indicates a potentially hazardous situation that, if not avoided, may result
in minor or moderate injury.
Here are the safety labels on your machine. Take the time to review them so that
when you see them on your machine you will be knowledgeable about the risk.
FARM AID EQUIPMENT, INC. 40 EAST 1ST STREET, CORSICA, SD 57328
PHONE (605) 946-5479 FAX (605) 946 5899
-ATTENTION! -BECOME ALERT!
-YOUR SAFETY IS INVOLVED!
www.farmaidequip.com