Advertisement
Table of Contents
System Requirements
Step 1: Install the
Integrated KVM 2-Port Switch
Step 2: Use the Hot Key Combinations
for the Integrated KVM 2-Port Switch
Specifications
Contact Information
This Installation Guide is meant to help you
install the Integrated KVM 2-Port Switch
quickly and easily. For additional information,
visit the Linksys website at www.linksys.com
2
ProConnect™ Series
3
3
5
8
9
Integrated KVM 2-Port Switch
System Requirements
Console
•
One VGA, SVGA or Multisync Monitor Capable of the Highest Resolution
You Will Be Using on Either Computer
•
One PS/2 Keyboard
•
One PS/2 Mouse
Either Computer
•
One VGA, SVGA, or Multisync Monitor Capable of the
Resolution You Will Be Using on Either Computer
•
One PS/2 Keyboard
•
One PS/2 Mouse
Step 1: Install the Integrated KVM 2-Port Switch
A. Power down the monitor and computers before you install the KVM Switch.
Unplug the power cords of any computers that have the Keyboard Power On
function; otherwise, the KVM Switch will receive power from those com-
puters. Then make sure all devices you are connecting are properly ground-
ed.
Note: The connectors on the built-in cables are color-coded to match
the appropriate ports on your computers; however, double-check
each connector's icon before you make the physical connection.
B. Connect the monitor's cable to the monitor port on the KVM Switch.
C. Connect the PS/2 keyboard's cable to the PS/2 keyboard on the KVM
Switch.
D. Connect the PS/2
mouse's cable to the
PS/2 mouse port on
the KVM Switch.
Highest
3
Advertisement
