Advertisement
E. Use the PC 1 cable for the first PC you are connecting. Plug the cable's
monitor connector into PC 1's monitor port.
F. Plug the PC 1 cable's keyboard connector into PC 1's keyboard port.
G. Plug the PC 1 cable's mouse connector into the PC 1's mouse port.
H. Use the PC 2 cable for the second PC your are connecting. Repeat steps E-
G.
I. Turn on the monitor and computers. The PC 1 LED will light up automati-
cally, and PC 1 will be displayed on the monitor.
Your installation is complete. To learn about the hot key com-
binations used to control the KVM Switch, proceed to step 2.
4
ProConnect™ Series
Integrated KVM 2-Port Switch
Step 2: Use the Hot Key Combinations
for the Integrated KVM 2-Port Switch
The KVM Switch is controlled by hot key commands, also known as keyboard
shortcuts. Hot key commands allow you to conveniently access either comput-
er directly from the keyboard. Using hot keys, you can manually toggle
between computers or automatically cycle between computers at a preset time
interval.
There are three basic hot key combinations:
• Toggle to the Other Computer
• Initiate Auto Scan Mode
• Initiate Auto Scan Mode and Change the Scan Interval
Toggle to the Other Computer
To toggle between the two computers, press and release the Scroll Lock key
twice.
5
Advertisement
