Advertisement
Get Connected
Connect the power adapter (provided) to the mesh extender and plug it into a power
1
source. Press the power button and the mesh extender will begin initial boot up. During
this process the LED will cycle through red, amber and green. This is normal.
If you have downloaded the app, open it and follow the installation instructions.
If you don't have the app, proceed to
2
If you are not using the app, obtain the MAC address by scanning the QR code on
the back of the mesh extender. Once you have the MAC address proceed to
Configured".
2
Cisco Business 143ACM Mesh Extender | Quick Start Guide
1
"Get
Configured" and follow the instructions.
"Get
Get Configured
Download the Cisco Business Mobile app
No computer is needed for setup, just use the app on your mobile phone.
Scan the QR code here to download the app or go to cisco.com/go/cbapp and
follow the installation instructions.
Alternative: Web UI (Internet Browser) Setup
If you do not wish to use the Cisco Business Mobile app you can use the Web UI for setup.
These instructions can be found online in the Web UI Setup Document.
To download the instructions see the
Mounting and Grounding
Cisco Business mesh extenders can be mounted in several configurations.
Mounting instructions are located in the Administration Guide, see the
section below.
Get Support
For Cisco support and additional product documentation, including the Web UI
Setup document and the Administration Guide visit:
https://cisco.com/go/cbw143acm
©2021 Cisco and/or its affiliates. All rights reserved. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries.
To view a list of Cisco trademarks, go to this URL: https:// www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
"Get
Support"
section below.
"Get
Support"
Advertisement
