IP Connectivity Test (Ping)
The IP Connectivity Test is used to see if another site or node on the net-
work can be reached.
• IP Address - IP address of the device you want to ping.
• Test Times - The number of ICMP echo requests to send to the specified
site. Range varies from 1 to 1000.
• Success/Failure - The number of times the specified site has responded—
or not—to a ping request.
Note: There is a 10-second interval between pings.
Select Start to begin the test. Select Cancel to cancel the test.
20
Instant EtherFast
Series
®
EtherFast
Layer 3 Management 24-Port 10/100 + 2-Port Gigabit Ethernet Switch
®
HTTP Configuration
The HTTP Configuration screen allows you to enable or disable Web man-
agement.
Note: Port 80 is used for HTTP service.
Select Apply to make changes. Select OK to return to the previous panel.
Select Cancel to cancel any changes.
21