Page 1
Replacements for missing or damaged parts will be shipped ASAP ! US office: Fontana UK office: Ipswich AU office: Truganina USER’S MANUAL Contact Us ! TV Stand HV10055 Do NOT return this item. US:cs.us@costway.com UK:cs.uk@costway.com AU:cs.au@costway.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Page 2
Before You Start Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included. Work in a spacious area, preferably on a carpet close to where the unit will be used.
Page 3
Install the small center panel(f) to the shelf panel. After done with step 1. install large center panel(e) to the shelf plank. 8 x 30mm Important note: M4 x 32mm - Place all wooden parts on a clean and smooth surface to avoid the parts from being scratched.
Page 4
Install top plank to both side plank and center plank. Install complete bottom plank to the center plank (e) and (f). 8 x 30mm 5&6 5. Install complete bottom plank to the center plank (e) and (f). 8&9 6. Install the side plank(door side) to the bottom plank and apron.
Page 5
x 12 Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish.
Need help?
Do you have a question about the HV10055 and is the answer not in the manual?
Questions and answers