Digital electric radiator with thermal fluid and wi-fi inside module (16 pages)
Summary of Contents for TCP Smart SMAWHTOWRAIL500W05EW
Page 1
WIFI TOWEL RADIATOR TCP Smart WiFi app-controlled towel radiator is the perfect bathroom heating solution. This advanced towel radiator comes with Smart WiFi featuring 24/7 hour programming, with Comfort and Eco mode settings. The display panel can be fitted on either left or right side to suit your bathroom layout.
LOCATION OF INSTALLATION This product can be installed in a bathroom but only in the area designated by the IP rating – Zone 3 – see location information below. Suitable for indoor only. This product is rated as IP24. If the product is to be installed within a bathroom it can only be located within zone 3.
Page 3
Do not use the heater in areas where flammable liquids are stored or where flammable fumes may be present. Do not use this heater if it has been dropped; Do not use if there are visible signs of damage to the heater; Do not leave the heater switched on when your property is vacant.
Choose a suitable location for the r a d i a t o r , taking into account the safety instructions above. ON/OFF BUTTON Press once to turn the device on. Press again to turn the device off. This feature can be performed using the TCP Smart App. MODE SELECTION Press this button to cycle between the following options: Press to enter mode selection.
BUTTONS Use these buttons to increase or decrease the target temperature, and to increase or decrease time within timer function This feature can be performed using the TCP Smart App. TIMER BUTTON 24 Hr Timer Press once, the screen will display “...
This feature can be performed using the TCP Smart App. Clock and day of the week setting Press the button for 3 seconds. The screen display will show” ”. Press to select the day: The number displayed will correspond to the day of the week as below:...
Page 8
Damage caused by non-observance of the user manual, e.g. connection to an unsuitable mains supply or non-compliance with the installation instructions Partially or completely dismantled appliances.
Page 9
CONNECTING THE APPLIANCE TO WI-FI Use the QR code below to download the TCP Smart App for control of the heater by voice or TCP Smart App. QR code for both android and iOS To control the heater using the TCP Smart App the unit must be turned on. Before you get started you will need the following: •...
Page 10
USING THE APPLIANCE W H E N C O N N E C T E D TO WIFI Main screen showing functions Towel Warmer Other Functions Inc Open widow detection, Temperature calibration & App background colour On/Off °C Target Temperature Night Light Light On / O...
Page 11
Other functions Select for following functions: Open Window Detection, Temperature Calibration and UI Background colour. Towel Warmer Open Windows Temperature correction Color Change with temperature Open window Detection Open Windows Press on main screen. Press to turn on and off function. Press < to return to main screen Temperature Calibration Use this function to manually adjust to the actual room temperature if it is not correct.
Page 12
Night Light Press to dim the LED screen. Press again to return to normal brightness. Light On / O Target Temperature Setting 35°C 5°C Use + and – buttons to set target temperature Timer Use the + and – button to set a countdown, from 1 to 24 hours. From the moment the time is set, the timer will then continue to count down.
Page 13
Mode Select to choose the following functions: Comfort mode - Set using the temperature scale on the main screen. Press < to return to main screen. Eco mode – this is a preset temperature which is 4°C below the comfort mode setting. Press < to return to main screen.
Page 14
Table 2 Information requirements for electric local space heaters Model identifier(s): SMAWHTOWRAIL500W05EW/SMABLTOWRAIL500W05EW Item Symbol Value Unit Item Unit Type of heat input, for electric storage local space heaters only (select one) Heat output Nominal heat manual heat charge control, with integrated thermostat...