TCP Smart SMABLFAN1500WBHN1903 User Instructions
  1. Manuals
  2. Brands
  3. TCP Smart Manuals
  4. Heater
  5. SMABLFAN1500WBHN1903
  6. User instructions

TCP Smart SMABLFAN1500WBHN1903 User Instructions

Wifi fan heater
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WIFI FAN HEATER
The TCP Smart WiFi Fan Heater offers an efficient and quick heating solution which is portable
and easy to use. Control your heating exactly as you desire either using the control panel situated
on the heater or mobile phone using the TCP Smart App and /or voice control via Alexa or Google
hub.
USER INSTRUCTIONS
IP24 ELECTRONIC SERIES
MODEL
SMABLFAN1500WBHN1903/
SMAWHFAN1500WBHN1903
IMPORTANT: Read these instructions fully before using the heater. Retain these instructions for
future reference.
SAFETY INSTRUCTIONS
1.
Before using set the power-level switch which is located at the back of the heater to "I".
Please note: there may be a trace of odour during the first few minutes of initial use, or after
a period of storage. This is normal and will quickly disappear.
2.
CAUTION: Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present. Children 3
years and younger should be continually supervised when in close proximity to the heater.
Children aged from 3 years to less than 8 years shall only switch on/off the appliance
provided that it has been placed or installed in its intended normal operating position and
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children aged from 3 years and less than 8 years
shall not plug in, regulate and clean the appliance or perform user maintenance.
3.
Use this heater on a horizontal and stable surface.
4.
Keep the power cord away from the hot body of the heater.
5.
Indoor use only.
6.
Do not place the heater on carpets with a very deep pile.
7.
Do not place the heater close to curtains or furniture in order to avoid a fire hazard.
8.
Do not insert any object through the air grilles of the heater.
9.
Do not use the heater in areas where flammable liquids are stored or where flammable
fumes may be present.
10. Always unplug the heater when moving it from one location to another.
POWER
AC220-240V
(to be read before operating the heater).
50-60Hz 1500W Class II

Advertisement

Table of Contents
loading

Related Manuals for TCP Smart SMABLFAN1500WBHN1903

Summary of Contents for TCP Smart SMABLFAN1500WBHN1903

  • Page 1 The TCP Smart WiFi Fan Heater offers an efficient and quick heating solution which is portable and easy to use. Control your heating exactly as you desire either using the control panel situated on the heater or mobile phone using the TCP Smart App and /or voice control via Alexa or Google hub.
  • Page 2 11. Do not use this heater if it has been dropped; 12. Do not use if there are visible signs of damage to the heater; 13. Do not leave the heater switched on when your property is vacant. WARNINGS In order to avoid overheating, do not cover the heater. Always use the heater in an upright position.

  • Page 3: Operating The Heater

    To turn the device off, press the MODE/ON/OFF button until the fan light is lit. The fan will then begin a 30 second count down. When the 30 seconds have counted down, the heater will turn off. This feature can be performed using the TCP Smart App. OSCILLATION Press the swing button to activate or deactivate the oscillation function.

  • Page 4: Correct Disposal Of This Product

    Hereby, Technical Consumer Products Ltd declares that the radio equipment type TCP Smart Wifi Fan 1500W – White, TCP Smart Wifi Fan 1500W – Black, is in accordance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address –...
  • Page 5 CONNECTING THE APPLIANCE TO WI-FI Use the QR code below to download the TCP Smart App for control of the heater by voice or TCP Smart App. QR code for both android and iOS To control the heater using the TCP Smart App the unit must be turned on.
  • Page 6 CONNECTING THE APPLIANCE TO WIFI DEVICE CONTROL SCREENS 1. Switch - (power On or Off) 2. Mode - to select Cool, Low Heat or High Heat 3. Timer - to select time countdown duration 4. Settings - to select oscillation function or schedule 2.
  • Page 7 LOW HEAT Press Mode. Press Low Heat Mode to activate. Set Target Temperature by using + or - buttons. HIGH HEAT Press Mode. Press High Heat Mode to activate. Set Target Temperature by using + or - buttons. AUTO Press Mode. Press Auto Mode to activate. Set Target Temperature by using + or - buttons.
  • Page 8 TIMER Using the Timer function, the heater can be set to turn off after a specified amount of time. Choose Timer at the bottom of the screen, select the duration of time that you want the heating to stay on for. The heater will turn off after the selected amount of time has passed.

  • Page 9: Weekly Schedule

    To add just one occurrence select the time you want to start the heater, press Switch and select on. Press Done followed by Save. Select the time you want the heater to turn off, press Switch and select off. Press Done followed by Save.
  • Page 10 To turn the heater off, press the repeat button to show the list of days. Tick the same day(s) you selected to turn the heater on. Press the < button on top left hand of the screen. Select the time you want the heater to turn off. Press Switch followed by off.

This manual is also suitable for:

Smawhfan1500wbhn1903

Table of Contents