Advertisement
Side Draft Hand Dryer
FAN5655
Thank you for purchasing this SIMX Side Draft Stainless Hand Dryer. Please read this manual
thoroughly before installation and retain for future reference .
TECHNICAL SPECIFICATIONS
Power Source
Total Input
Air Speed
Sound Level @ 1m
Drying Time
Auto Shut Off
IP Rating
Safety
Dimensions
Material
IMPORTANT
All installations and electrical must comply with local and national electric codes as applicable.
Electrical work should only be carried out by a registered electrician
Ensure that the unit is installed on a suitably rated fused circuit with the supply isolating switch
having a minimum contact separation of at least 3mm. This device should be plugged into outlet
controlled by an earth leakage circuit breaker.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar
qualified persons in order to avoid a hazard.
Do not insert objects into the air outlets. Doing so may be hazardous and could result in electrical
shock.
Do not obstruct the air inlets or outlets in any way.
Service hand dryer at regular intervals.
Do not use appliance within close proximity to water basins, tubs, showers or other vessels
containing water.
Young children should be supervised to ensure that they do not hang or play with this appliance.
The appliance is not to be used by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience or knowledge, unless they have been given supervision
or instruction.
220-240V AC
1650W
342 km/hr
36 dB(A)
10 - 15 seconds
30 seconds
IPX4
Class I
300 (H) x 222 (W) x 730 mm (D
1.2mm stainless steel 304
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SImx FAN5655
Summary of Contents for SImx FAN5655
- Page 1 INSTALLATION INSTRUCTIONS Side Draft Hand Dryer FAN5655 Thank you for purchasing this SIMX Side Draft Stainless Hand Dryer. Please read this manual thoroughly before installation and retain for future reference . TECHNICAL SPECIFICATIONS Power Source 220-240V AC Total Input 1650W...
- Page 2 Fig. 2 Fig. 1 *Measurements to be used for fixed wiring location BEFORE YOU START Note: This unit must be fixed to a solid supporting wall and must not be mounted above shelves or over stainless steel/reflective surface counters. To ensure the ease of installation and subsequent maintenance of this unit the horizontal distance to any adjacent wall should not be less than 200mm.
- Page 3 Fig. 3 Fig. 4 Fig. 5...
- Page 4 During this period if the product has a defect of this nature it will be repaired or replaced free of charge by Simx with the same item, or a similar one of higher specifications, ON THE CONDITIONS THAT: The buyer returns it to the seller from whom it was bought, freight paid.
Need help?
Do you have a question about the FAN5655 and is the answer not in the manual?
Questions and answers