Memory Locations - Cobra microTalk PR 4750 WX Owner's Manual

Mode Functions
Operation
Main Icons
Intro Operation Customer

10 Memory Locations

Assistance
Your microTALK ® radio has 10 Memory Locations for storing
your most frequently used channels and channel/privacy code
combinations. These Memory Locations can be selected individually
or can be scanned. (See page 20 for memory location scan.)
To program a memory location:
Intro Operation
Lock/Mode Button
Secondary Icons
1. Press the Lock/Mode button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down
Memory Icon
Secondary Icons button to select the memory location
(0 through 9).
Notice
Channel Buttons
Notice
3. Press the Hi•Low/Enter button to enter
a new memory location or edit an already
Hi•Low/Enter Button programmed memory location. The channel
numbers will flash on the display.
4. Press the Channel Up or Channel Down
button to select a channel (1 through 22).
5. Press the Hi•Low/Enter button.
The CTCSS icon and privacy code
numbers will flash on the display.
12 English
Warranty
Customer Warranty
Assistance
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
Main Icons
Introduction
•
Intro
Secondary Icons
Secondary Icons
Operation
Customer Assistance Warranty
Intro Operation Customer
6. Choose one of the following:
Assistance
a. Press the Channel Up or Channel Down
button to select a CTCSS privacy code
(01 through 38) for the channel.
Operation Customer Warranty
Assistance
b. Press the Hi•Low/Enter button to
switch from CTCSS to DCS. The DCS
icon and privacy code numbers will
flash on the display. The Channel Up
or Channel Down button can then be
used to select a DCS privacy code
(01 through 83) for the channel.
If "OF" flashes in place of the privacy
Notice
code numbers, a privacy code is
already set in the opposite (CTCSS
Notice
or DCS) system. Press the Channel Up
or Channel Down button to cancel
the opposite code and select a privacy
code from the active system for the
selected channel.
7. Choose one of the following:
a. Press the Hi•Low/Enter button to enter
the channel/privacy code in the selected
memory location and return to Step 1
to program another memory location.
b. Press the Lock/Mode button to
enter the channel/privacy code in
the selected memory location and
proceed to other functions on the
channel/privacy code displayed
before you entered mode functions.
c. Press the Talk button to enter the
channel/privacy code in the selected
memory location and exit mode functions.
Upon release of the Talk button, the
radio will enter Standby mode on the
channel/privacy code just entered.
Nothing comes close to a Cobra
Warranty
® 13