Advertisement
Quick Links
Scope of Supply/Bill of Material & Mounting Drawings
Part Number: S-VS1050XT-09-01-AL / S-VS1050XT-09-02-AL
Part Description: Engine Guard–SUZUKI V-STROM1050 XT
Applicable to Finished colour versions of Silver and Black
Installation / Parts List / Bill of Material for Mounting
=
Copyright By SRC
Design and Specification are subjected to change
Page 1
Advertisement
Related Manuals for SRC S-VS1050XT-09-01-AL
Summary of Contents for SRC S-VS1050XT-09-01-AL
- Page 1 Scope of Supply/Bill of Material & Mounting Drawings Part Number: S-VS1050XT-09-01-AL / S-VS1050XT-09-02-AL Part Description: Engine Guard–SUZUKI V-STROM1050 XT Applicable to Finished colour versions of Silver and Black Installation / Parts List / Bill of Material for Mounting Copyright By SRC...
- Page 2 (15) – 1 off, the screw M8x30 (10) – 1 off, And tighten it to torque as shown in the BOM table. As show RH motorbike Copyright By SRC Design and Specification are subjected to change Page 2...
- Page 3 M6 (14) – 2 off, the screw M6x15 (8) – 2 off, at the end side And tighten it to torque as shown in the BOM table. As show RH motorbike Copyright By SRC Design and Specification are subjected to change Page 3...
- Page 4 Engine Guard in “As is mounted condition” is as shown in the drawing to the Right. As show RH motorbike Copyright By SRC Design and Specification are subjected to change Page 4...
-
Page 5: General Instructions
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.