Siemens SL63HX52CE Information For Use page 40

Table of Contents

Advertisement

en Troubleshooting
Fault
E:32-00 will light up altern-
ately or indicator for water
supply lights up.
E:34-00 will light up altern-
ately.
E:61-02 will light up altern-
ately.
E:61-03 will light up altern-
ately. Water is not drained.
40
Cause
Water is continuously run-
ning into the appliance.
Wastewater pump is
blocked.
Cover of the wastewater
pump is loose
Wastewater hose is blocked
or kinked.
Siphon connection is still
sealed.
Cover of the wastewater
pump is loose.
Troubleshooting
Remove the filter from the supply
5.
hose
Clean the filter.
6.
Re-insert the filter in the supply
7.
hose.
Screw the water connection back
8.
on.
Check the water connection for
9.
leaks.
Restore the power supply.
10.
Switch the appliance on.
11.
Turn off the water tap.
1.
Call "Customer Service"
2.
→ Page 52.
Clean the wastewater pump.
→ "Clean wastewater pump",
Page 51
Secure the cover of the "Wastewa-
ter pump " → Page 51 so it clicks
into position.
Reposition the wastewater hose
1.
without kinks.
Remove residues.
2.
Check the connection to the siphon
and open if necessary.
Secure the cover of the "Wastewa-
ter pump " → Page 51 so it clicks
into position.

Advertisement

Table of Contents
loading

Table of Contents