Altech CB Series Instruction Manual page 2

Auxiliary Load Connection (Size 4)
Typical application for Auxiliary device, one output for Load
"DC Bus", one Input/Output for connection to the battery.
N°1 battery (12 Vdc);
N°2 battery (24 Vdc) connected in Series;
Operating and Display Element:
5
1
4
3
6
7
8
11
Size 1
Size 2
10 18 10
No. 1: Battery Connection Port:
Connect the battery between pin. 3 (–) and 4 (+)
One battery (12 Vdc) for CB12yy;
Two battery (12 Vdc) connected in Series for CB24yy
No. 2: Output Load: (Size 4)
If Present on the device
Connect this Output to the load 1 (–). 2 (+).
(Output Load It is to supply Auxiliary Load)
No. 3: Charging Level Current:
In order to protect the battery from excessive charging currents, the device allows you to limit the maximum charge current
by adjusting the trimmer. It allows you to limit from max In up to 20% of current In. To determine the
maximum battery charge current, see the battery manufacturer's Data Sheet, If it is not possible,
consider that on average the maximum charge current is 10% of Ah's rated battery current; The data
is suitable for both Lead Acid and NiCd batteries.
Altech Corp. ® • 35 Royal Road
Normal connection: Battery & Testing Charger:
Typical application for CBxxyy device:
N°1 battery (12 Vdc) for CB12yy;
N°2 battery (12 Vdc) connected in Series for CB24yy;
It's
CB2420AR.
and power on them (also
the CB
LED diagnosis according to the usual
second holds steady on the LED
active
off
is no communication between the two CB has alarm with flash =
code 11
charge the battery
appropriate to human
and the situation
1 5 18
4
6
3
7
11
8
Size 3
18 10
• Flemington, NJ 08822-6000
CB Smart Battery Chargers
Instruction Manual
"Redundancy" Connection
possible to request the
Just connect the two CB via the RJ45 cable to AUX2
at different times), automatically one of
becomes the real battery charger (indicated by a flashing
the management of alarms. If the piece that charge
(or break!) the second automatically
blinks, under these conditions both the CB trying to
(situation
intervention, just
normalizes.
4
5
6
11
7
13
3
8
15
1
• P 908.806-9400 • F 908.806.9490 • www.altechcorp.com
Redundancy option for the model
frequency) while the
diagnosis. On both pieces is
begins charging. If there
not recommended) to which it is
reconnect the two pieces
5
2
1
4
3
6
18
7
8 11
9-12
17
15
Size 4
10
turns
13
14
16