Control - TCS FBI6110 Product Information

03/2013

Control

In the menu Control, displayed buttons and status indications can be configured. For an
implementation within a TCS:BUS
requirements): FBI4200, BRE2 or FBS1100.
 Enter the data.
 Confirm with the Save button,
the settings are stored.
 The button Reset resets the
content to the last stored
state. No reload to factory
settings is realised.
Parameter Explanation
 Unique name to display in the menu: "Live transmission".
name
 The serial number of the connected devices resp. function is entered
serial number
control function  This number determines the importance and function of the sent or
 Only to be entered if the BRE is selected.
channel number  The channel number of a connected FBI4200 is entered here. Only to
 Three types of devices can be selected: FBI, BRE and FBS (see table
type
 To activate or deactivate the display of the function Name in the menu
indication
Device Entry created
type
FBI button with
status
indication
BRE button
FBS status
indication
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de
®
system, the following devices are used (depending on
here.
received control protocol at the TCS:BUS
be entered if the FBI is selected.
below)
Live transmission
Function
channel functions with status indi-
cation (parallel run with IMM1100)
send control function
status indication
(ON = control function 1 or 3,
OFF = control function 2 or 4)
17
®
.
Subject to technical changes.
PI_FBI6110-uk
Enter in overview
channel number,
serial number of the FBI
or extent™
serial number and con-
trol function number
serial number
2 A