Klarstein SAINT HELENS STUDIO LOFT 2 Manual page 67

Problem
The remote control does
not work when buttons are
pressed.
Possible cause
No batteries.
Poor signal transmission.
Distance too great.
Solution
Replace the batteries.
Make sure that the
distance between
transmitter and receiver is
not too great.
Press the buttons on the
remote control with a
smooth movement and
gentle pressure.
Repeated pressing of the
buttons in rapid succession
may cause the transmitter
to malfunction.
Operate the remote
control at a distance of
less than 20 feet from
the front of the unit; point
the remote control at the
control panel.
EN
67