Download
Share
Print this page
Ameriwood HOME 3499850COM Manual
  1. Manuals
  2. Brands
  3. Ameriwood HOME Manuals
  4. Indoor Furnishing
  5. 3499850COM
  6. Manual

Ameriwood HOME 3499850COM Manual

Dresser / desk combo
Hide thumbs

Advertisement

Quick Links

Download this manual
3499850COM
Dresser / Desk Combo
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from
g furniture.
WARNING: Manufacturer assumes no liability
for improper
on or excessive loads
placed on screws or bracket. This wall anchor
is not a subs tute for proper adult supervision.
Do Not Return This Product!
Contact our customer service team for help rst.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Easy
Assembly Di culty Meter
Follow Ameriwood Home
B343499850COM00MP
Tough
You
Tube

Advertisement

loading
Need help?

Need help?

Do you have a question about the 3499850COM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ameriwood HOME 3499850COM

Summary of Contents for Ameriwood HOME 3499850COM

  • Page 1 Easy Tough Assembly Di culty Meter Serious or fatal crushing injuries can occur from g furniture. Follow Ameriwood Home WARNING: Manufacturer assumes no liability for improper on or excessive loads placed on screws or bracket. This wall anchor Tube is not a subs tute for proper adult supervision.

  • Page 2: Helpful Hints

    Contact Us! Do NOT return this product! Contact our friendly customer service team t for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Tube Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOURS...

  • Page 3: Before You Start

    Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver #2 Phillips Head Screwdriver, Plier and Hammer. Cau on: If using a power drill or power screwdriver for screwing please be aware to slow down and stop when screw is ght.
  • Page 4 Not actual size BOTTOM PANEL UPPER DRAWER TOP T3499850030MP T3499850010MP DRAWER TOP T3499850020MP (2x) UPPER LEFT/ RIGHT PANEL T3499850040MP LEFT SIDE PANEL T3499850050MP CENTER PANEL (2x) RIGHT SIDE PANEL T3499850060MP BRACE PANEL T3499850070MP T3499850080MP DESK TOP PANEL T3499850090MP UPPER BACK PANEL (3x) T3499850180MP APRON PANEL...

  • Page 5: Front View

    Not actual size FRONT VIEW BACK VIEW This part is paperboard construction. It is not made from wood, but is required for the assembly of unit DRAWER FRONT DRAWER BACK ameriwoodhome.com...

  • Page 6: Part List

    Hardware Bag Reference number : 23499850COM0MP Part List Not actual size 7 x 34mm Ø15 x 10mm 6 x 30mm Ø4 x 11mm (x6) (x8) (x17) (x17) (x20) (x28) TMP54520 TMP2531 TMP5101 TMP22620 TMP8002 TMP12120 Drawer Bracket Cam Lock Cover Minifix Bolt Minifix Housing Wood Dowel...
  • Page 7 STEP 1 (x7) (x4) TMP5101 TMP8002 Minifix Bolt Wood Dowel - Install Minifix Bolt (2) and Wood Dowel (4) into Center Panel (F) as shown below. - Turn Center Panel (F) to Front and install Minifix Bolt (2) Step 1.2 Step 1.1 TURN 180°...
  • Page 8 STEP 2 (x2) (x4) TMP5101 TMP8002 Minifix Bolt Wood Dowel - Install Minifix Bolt (2) and Wood Dowel (4) into Right Side Panel (G) as shown below. ameriwoodhome.com...
  • Page 9 STEP 3 (x4) (x4) TMP22620 TMP8002 Minifix Housing Wood Dowel - Install Minifix Housing (3) and Wood Dowel (4) into Brace Panel (H) as shown below. - Repeat this step for other Brace. Arrow facing outward (x2) ameriwoodhome.com...
  • Page 10 STEP 4 Quick Assembly Proper Oriental of CAM LOCK - Assemble Center Panel (F) and Brace Panel (H) as shown below. ameriwoodhome.com...
  • Page 11 STEP 5 Quick Assembly Proper Oriental of CAM LOCK - Assemble Right Side Panel (G) and Brace Panel (H) as shown below. ameriwoodhome.com...
  • Page 12 STEP 6 - Assemble Bo�om Panel (C) with Center Panel (F) and Right Side Panel (G) as shown below. Turn the switch to lock. pre-drill nut turn switch to lock ameriwoodhome.com...
  • Page 13 STEP 7 (x4) (x12) TMP21201 TMP22108 Metal Leg Leg Screw - Install Metal Leg(8) and Leg Screw (9) into Bo�om Panel (C) as shown. (x3) (x3) (x3) (x3) ameriwoodhome.com...
  • Page 14 STEP 8 (x1) TMP84050 Safety Bracket Kit - Install Safety Bracket Kit (12a) and (12b) to Drawer Top (B) as show. ameriwoodhome.com...
  • Page 15 STEP 9 - Assemble Drawer Top (B) with Center Panel (F) and Right Side Panel (G) as shown below. Turn the switch to lock. pre-drill nut turn switch to lock ameriwoodhome.com...
  • Page 16 STEP 10 - Assemble Upper Le� / Right Panel (D) into Drawer Top (B) and into Upper Drawer Top (A) as shown below. Turn the switch to lock. pre-drill nut turn switch to lock unfinished edge unfinished edge ameriwoodhome.com...
  • Page 17 STEP 11 (x19) TMP4703 Nail IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. With the help of another, carefully turn your unit over on its front side. Make sure the unit is square. Posi�on both back panel as shown.
  • Page 18 STEP 12 (x20) TMP4703 Nail IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. With the help of another, carefully turn your unit over on its front side. Make sure the unit is square. Posi�on both back panel as shown.
  • Page 19 STEP 13 - Flip the unit, turn to front of unit. TURN 90° TURN 180° ameriwoodhome.com...
  • Page 20 STEP 14 (x2) (x2) (x2) TMP22620 TMP12120 TMP53600 Minifix Housing PWA Screw L - Bracket - Install Minifix Housing (3), L - Bracket (13) and PWA Screw (6) into Apron Panel (J) as below shown. Arrow facing outward ameriwoodhome.com...
  • Page 21 STEP 15 (x4) (x4) TMP22620 TMP8002 Minifix Housing Wood Dowel - Install Minifix Housing (3) and Wood Dowel (4) into Modesty Panel (K) as shown below. Arrow facing outward ameriwoodhome.com...
  • Page 22 STEP 16 Quick Assembly Recomm. 2 Persons Proper Oriental of CAM LOCK - With another help to hold Apron Panel (J), assemble Apron Panel (J) and Center Panel (F) as shown below. unfinished edge ameriwoodhome.com...
  • Page 23 STEP 17 Quick Assembly Recomm. 2 Persons Proper Oriental of CAM LOCK - With another help to hold Modesty Panel (K), assemble Modesty Panel (K) and Center Panel (F) as shown below. finished surface ameriwoodhome.com...
  • Page 24 STEP 18 (x2) (x2) (x3) TMP22620 TMP8002 TMP5101 Minifix Housing Wood Dowel Minifix Bolt - Install Minifix Bolt (2), Minifix Housing (3) and Wood Dowel (4) into Le� Side Panel (E) as shown below. Arrow facing outward ameriwoodhome.com...
  • Page 25 STEP 19 Quick Assembly Proper Oriental of CAM LOCK Recomm. 3 Persons - With another help to hold Modesty Panel (K) and Apron Panel (J), assemble Le� Side Panel (E) into Modesty Panel (K) and Apron Panel (J) into as shown below. ameriwoodhome.com...
  • Page 26 STEP 20 (x2) (x2) (x2) TMP22620 TMP8002 TMP5101 Minifix Housing Wood Dowel Minifix Bolt - Install Minifix Bolt (2) Minifix Housing (3), and Wood Dowel (4) into Desk Top Panel (I) as shown below. Arrow facing outward ameriwoodhome.com...
  • Page 27 STEP 21 Quick Assembly Recomm. 2 Persons Proper Oriental of CAM LOCK - Assemble Desk Top Panel (I) into Center Panel (F) and Le� Side Panel (E) shown below. Step 21.1 Step 21.2 ameriwoodhome.com...
  • Page 28 STEP 22 (x2) TMP12120 PWA Screw - Install PWA Screw (6) into Desk Top Panel (I) as below shown. ameriwoodhome.com...
  • Page 29 STEP 23 Techniques move the unit, should hold by Two Person and carry at Bo�om Side as shown below. Drawer suggest to unistalled before movement the unit. Exceeding these wrong step movement, could cause unit damage, sagging, instability, product collapse and serious injury.
  • Page 30 STEP 24 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. (x1) hole IMPORTANT: THIS UNIT MUST BE TMP84050 SECURE TO THE WALL TO HELP stud Safety Bracket Kit PREVENT TIPOVER.
  • Page 31 STEP 25 (x6) (x3) (x12) TMP54520 TMP5101 TMP12120 Drawer Bracket Minifix Bolt PWA Screw - Install Minifix Bolt (2) into Drawer Front (L). - Install Drawer Bracket (5) to Drawer Front (L) using PWA Screw (6). - Repeat this step for other drawers. (x3) ameriwoodhome.com...
  • Page 32 STEP 26 (x3) TMP22620 Minifix Housing - Install Minifix Housing (3) into Drawer Support (O) as below shown. - Repeat this step for other drawers. Arrow facing outward (x3) ameriwoodhome.com...
  • Page 33 STEP 27 Quick Assembly Proper Oriental of CAM LOCK (x12) TMP12120 PWA Screw - Assemble Drawer Side (M & N) using PWA Screw (6) and Drawer Support (O) to Drawer Front (L). - Repeat this step for other drawers. unfinished surface (x3) ameriwoodhome.com...
  • Page 34 STEP 28 (x6) TMP4201 Screw - Slide in Drawer Bo�om (Q) into Drawer Side ( M & N ) and Drawer Front (L). - Assemble Drawer Back (P) using Screw (15) to Drawer Support (O). Repeat this step for other drawers. (x3) ameriwoodhome.com...
  • Page 35 STEP 29 (x12) (x6sets) TMP21970 TMP40950 Drive Fastener T Knob Handle Set - Install Drive Fastener (7) to Drawer Back (P). - Install T Knob Handle Sets (10a & 10b) to Drawer Front(L). - Flip unit to Front and repeat this for other drawers. Step 27.2 TURN 90°...
  • Page 36 STEP 30 (x8) (x1) TMP2531 TMP26709 Cam Lock Cover Wireless Charger - Install Cam Lock Cover (1) and Wireless Charger (14) to unit. - Install drawer into body. close to lock...
  • Page 37 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging instability product collapse and/or serious injury. 20 lbs Accommodates most flat 9.07 kg panel TV’s up to 40” 10lbs/ 4.5kg MAX 25 lbs 11.3 kg 45 lbs...
  • Page 39 - Antes de la instalación, asegúrese de que el interruptor de luz esté desbloqueado. Sistema de cierre Cam Lock (página 3) Este sistema de sujeción Cam Lock se utilizará durante todo el proceso de montaje. ** Si la posición del pasador está desplazada, use pinzas para sostener el interruptor basculante en posición vertical y gire con cuidado el interruptor de bloqueoal centro de la abertura.
  • Page 40 Página 7 - Instale el perno Minifix (2) y el pasador de madera (4) en el panel central (F) como se muestra a continuación. Página 8 - Instale el perno Minifix (2) y el pasador de madera (4) en el panel lateral derecho (G) como se muestra a continuación.
  • Page 41 Página 16 - Ensamble el panel superior izquierdo/derecho (D) en la parte superior del cajón (B) y en la parte superior del cajón superior (A) como se muestra a continuación. Gire el interruptor para bloquear. Página 17 Con la ayuda de otro, voltee cuidadosamente su unidad sobre su lado frontal. Asegúrese de que la unidad sea cuadrada.Coloque ambos paneles traseros como se muestra.
  • Page 42 Página 22 - Con otra ayuda para sostener el panel de la plataforma (J), ensamble el panel de la plataforma (J) y el panel central (F) como se muestra a continuación. Página 23 - Con otra ayuda para sujetar el panel modesto (K), ensamble el panel modesto (K) y el panel central (F) como se muestra a continuación.
  • Page 43 Página 30 Página 31 - Instale el perno Minifix (2) en el frente del cajón (L). - Instale el soporte del cajón (5) en el frente del cajón (L) usando el tornillo PWA (6). - Repita este paso para otros cajones Página 32 - Instale la carcasa Minifix (3) en el soporte del cajón (O) como se muestra a continuación.
  • Page 44 Página 33 - Ensamble el lateral del cajón (M y N) con el tornillo PWA (8) y el soporte del cajón (O) en el frente del cajón (L). - Repita este paso para otros cajones. Página 34 - Deslice la parte inferior del cajón (Q) hacia el lado del cajón (M y N) y el frente del cajón (L).
  • Page 45 Página 38 Página 39...
  • Page 46 -Avant l'installation, assurez-vous que l'interrupteur d'éclairage est déverrouillé. ** Si la position de la broche est décalée, utilisez une pince tenir l'interrupteur à bascule en position verticale position et tournez prudemment le verrou au centre de l'ouverture.
  • Page 47 Page 7 - Installer le boulon Minifix (2) et la cheville en bois (4) dans le panneau central (F) comme indiqué ci-dessous. Page 8 - Installer le boulon Minifix (2) et la cheville en bois (4) sur le panneau latéral droit (G) comme il est montré...
  • Page 48 Page 16 - Assemblez le panneau supérieur gauche/droit (D) au haut du tiroir (B) et en haut du tiroir supérieur (A) comme illustré ci-dessous. Basculez l'interrupteur pour verrouiller. Page 17 IMPORTANT! LE PANNEAU ARRIÈRE EST UNE PARTIE STRUCTURELLE DE CET APPAREIL ET DOIT ÊTRE INSTALLÉ...
  • Page 49 Page 22 - A l'aide d'une autre aide pour soutenir le panneau de pont (J), assembler le panneau de pontplate-forme (J) et le panneau central (F) comme illustré ci-dessous. Page 23 - Avec une autre aide pour tenir le panneau de fond (K), assembler le panneau de fond (K) et le panneau central (F) comme illustré...
  • Page 50 Page 31 - Assembler le côté du tiroir (M et N) avec la vis PWA (8) et le support du tiroir (O) sur le devant du tiroir (L). - Répétez cette étape pour les autres tiroirs. Page 32 - Glisser le bas du tiroir (Q) sur le côté du tiroir (M et N) et le façade de tiroir (L).
  • Page 51 Page 37 Page 38...