Advertisement
FLOOR CLEANING
1
Plug In Vacuum
Then place your foot
gently on the floor nozzle
and tilt the handle back.
2
Choose Setting
The Rocket
DeluxePro Ultra-Light has a 2-speed Power
®
slider switch on the handle. Slide the Power switch to
appropriate speed setting (I or II) and start cleaning.
For questions or to register your product, visit us online at sharkclean.com
©2018 SHARK and ROCKET are registered trademarks of SharkNinja Operating LLC.
VERSATILE FLOOR-TO-CEILING CLEANING
Setting I
Bare Floor, Area Rugs
The brushroll spins slowly
to clean bare floors and
delicate area rugs.
Setting II
High Pile Carpets
The brushroll spins faster
to pick up debris below the
surface of your carpets.
NOTE: For deep cleaning per
ASTM F 608 (embedded dirt in
carpets) please set to High Pile
Carpets (II).
DUST-AWAY is a trademark of SharkNinja Operating LLC.
ABOVE-FLOOR CLEANING
1
Stand the vacuum upright.
Step on the foot pedal
and pull the wand up to
disconnect it from the
motorized floor nozzle.
Press the Release button
on the top of the wand
to disconnect it from the
handheld vacuum.
2
Attach desired cleaning accessory.
@sharkcleaning
OR
Wand
Release
Wand Release
Floor Nozzle
Release
NOTE: Use Setting I
for all above-floor
accessories.
Advertisement
