Beckhoff SCT Series Documentation page 7

Ring-type current transformer for differential current 0...2 a, type b/b+ (all-current sensitive), iso62020-1 conform

Hide thumbs Also See for SCT Series:

Table of Contents

• The operating instructions.

• The fact that operating instructions can only list general regulations and that these regulations must be

followed.

• Check the device carefully for transport damage prior to commissioning. The device must not be put

into operation if it is mechanically damaged.

• The devices described are intended for installation by qualified electricians and may only be installed in

electrical plant rooms or in closed housings. Any other use or the disregard of these application notes

will result in the loss of the warranty/guarantee.

• The devices may only be installed in dry indoor rooms.

• Do not mount on highly flammable materials.

• Operation with a higher current than the rated current specified on the name plate can lead to

overheating of the current transformer and thus to burns.

SCT5xxx

Version: 1.0

Foreword

Table of Contents