Problems With Transparencies, Photos, Or Envelopes - Lexmark Color Jetprinter Z42 User Manual

Problems with transparencies, photos, or envelopes

Problems with transparencies, photos, or envelopes
Problems with transparencies, photos, or envelopes Problems with transparencies, photos, or envelopes
Colors on the printout are faded Colors on the printout are faded Colors on the printout are faded Colors on the printout are faded
• • • • Your print cartridge may be low on ink. Check the ink
level graphics on the Cartridges
Control Program. For help, see page 21.
• • • • Clean the print nozzles. For help, see page 25.
• • • • If the colors still seem faded, wipe the print nozzles. For
help, see the "Troubleshooting: Print Quality" section
of your printer driver Help. For help accessing the
printer driver Help, see page 6.
Transparencies or glossy photo papers stick together Transparencies or glossy photo papers stick together
Transparencies or glossy photo papers stick together Transparencies or glossy photo papers stick together
• • • • Remove each page as it exits the printer and allow to
dry completely before stacking.
• • • • Use a transparency or photo paper designed for an
inkjet printer.
Transparencies or photos contain white lines Transparencies or photos contain white lines Transparencies or photos contain white lines Transparencies or photos contain white lines
• • • • From the Printer Properties, select High (1200 x 1200
dpi) or Maximum (2400 x 1200 dpi) dpi) Maximum (2400 x 1200 dpi) Print Quality. For
dpi) dpi) Maximum (2400 x 1200 dpi) Maximum (2400 x 1200 dpi)
help, see page 5.
• • • • Your print nozzles may need cleaning. For help, see
page 25.
Printer does not feed envelopes Printer does not feed envelopes
Printer does not feed envelopes Printer does not feed envelopes
For help, see page 32.
Cartridges tab of your printer's Cartridges Cartridges
High (1200 x 1200
High (1200 x 1200 High (1200 x 1200
•
•
35 35 35 35
Troubleshooting
•
•
•