Technovision TVS-S1 User Manual page 24

and contact Technovision Service Team Contact details mansion in Annexure of the manual.
Compare the components of the shipment with the bill of lading. Report any missing items to the
carrier and to Technovision immediately.
TIPPING/HEAVY EQUIPMENT HAZARD
• The unit is easily tipped. Use extreme caution when unpacking and moving the equipment.
• A minimum of two or more people (as per weight & size of the stabilizer) are required to unpack
and move the equipment.
• Ensure that the floor and sub-floor can support the total weight of the system, especially when
the weight is concentrated on the stabilizing feet. Failure to follow these instructions can result
in death or serious injury.
Move to the Installation Site Use a pallet jack or a forklift to move the Modular PDU.
Make sure to lift only from the bottom. Do not use a forklift if the Modular PDU has
been removed from its pallet.
Notice:-
 Leaving the equipment uncovered and exposed to the elements will cause damage and
void the factory warranty.
• When possible, leave the equipment on the pallet until you are ready to move it to its
final location.
• If the height of the enclosure exceeds the height of the doorway, remove the enclosure
from the pallet.
• After the unit has been removed from the pallet, move it only by rolling it on the casters.
Ensure that the floor is level. The unit must be installed on a level floor.
•
20