Panasonic LZ1000G Series Operating Instructions Manual page 15

TV
RF cable
Aerial
Keep the space between the TV and RF cable to
≥
prevent distorted image.
Do not put the RF cable close to the mains lead to
≥
avoid noise.
≥ Do not place the RF cable under the TV.
An aerial, correct cable (75 Ω coaxial) and correct
≥
terminating plug are required to obtain optimum
quality picture and sound.
If a communal aerial system is used, you may require
≥
the correct connection cable and plug between the
wall aerial socket and the TV.
≥ Your local Television Service Centre or dealer may be
able to assist you in obtaining the correct aerial
system for your particular area and the accessories
required.
Any matters regarding aerial installation, upgrading of
≥
existing systems or accessories required, and the
costs incurred, are the responsibility of you, the
customer.
To obtain optimum quality picture, select either an
≥
Aerial or a cable TV network.
∫ Mains lead
(e.g. LZ1000G series)
Mains lead
Mains plug type may vary depending on the country.
≥
Cable tie (Bundled the mains lead)
To loosen:
Keep pushing the knob
Knob
To remove from the TV:
Snaps
Keep pushing both side snaps
∫ Network
A broadband network environment is required to be able
to use internet services.
If you do not have any broadband network services,
≥
please consult your retailer for assistance.
Prepare the internet environment for wired connection
≥
or wireless connection.
Setup of the network connection will start when first
≥
using the TV. (p. 22)
For details, refer to [eHELP] (Search by Purpose >
≥
Network > Network connections).
AC 220-240 V
50 / 60 Hz
15
English