Interface Operation By External Keypad - r.LiNK RL4-UCON7-500 Manual

Interface operation by external keypad

3.
The interface's external keypad can be used to switch the enabled inputs.
 Long press of keypad (2-3 seconds)
By long pressing the external keypad (2-3 seconds), the video interfaces witches the input
from the factory video to the inserted video sources.
Each press (approx. 2 sec) will switch to the next enabled input. If all inputs are enabled the
order is:
Factory video
Disabled inputs will be skipped.
Note: The interface switches after releasing the switch (after long pressure).
 Short press of keypad (only if DIP 1 is set to ON)
By short pressing the external keypad, the video interfaces switches from the factory video
to the front camera input and back to factory video.
Version 24.09.2019
All manuals and user guides at all-guides.com
 
video IN1 video IN2
HW CAM(V98) / (V43)
 
factory video ...
RL4-UCON7-500