2.5.
Connection – 10pin Power / CAN cable
Connect the enclosed 10pin Power / CAN cable's female10pin connector to the male 10pin
connector of the video interface.
Connect the single grey wire
isolate the connection (Pins – see diagram).
Connect the single blue wire
isolate the connection (Pins – see diagram).
Connect the single red wire to stabile
Connect the single black cable to the vehicle's negative Ground.
Version 24.09.2019
All manuals and user guides at all-guides.com
„CAN LOW"
of the 4 cables to the vehicle's CAN low wire and
„CAN HIGH"
of the 4 cables to the vehicle's CAN high wire and
+12V terminal
HW CAM(V98) / (V43)
30.
RL4-UCON7-500