Route - Cobra GPS 100 Operating Instructions Manual

2.4
N AV D ATA PA G E
Routes: Summary
Nav Data Designating
Page New Route
Navigating Creating
Along Route New Route
Waypoints Editing
Listed Waypoints
Viewing
Waypoints
21

Route

When you select ROUTE from the Nav Data page (see
GPS 100 to designate a route consisting up of to 50 waypoints. The unit will
then guide you along the route. As you reach each waypoint, the unit will
automatically begin pointing you to the next waypoint, until you reach your
final destination.
Selecting Options
From the Nav Data page, highlight using the ZOOM IN/OUT button and
select ROUTE by pressing the ENTER button to display the Route screen. Use
the ZOOM IN/OUT button to scroll through the menu sections, then press
the ENTER button to go to the highlighted option. Use the ZOOM IN/OUT
button again to highlight your choice, then press the ENTER button to select
it. Press the PAGE button to return to the main page.
Navigate Option
Highlight and select NAVIGATE to make your GPS 100 guide you along a
route you have created (see "New Option" below). Highlight and select
FORWARD to navigate forward along a route from start to end point or
highlight and select REVERSE to navigate in a reverse direction from end point
to start point.
New Option
Highlight and select NEW to create a new route. When the OVERWRITE
EXISTING? screen appears, highlight and select YES to create your new
route (see "Creating A New Route," page 22) or NO to cancel creation
of a new route.
Edit Option
Highlight and select EDIT to add or delete any waypoints you have selected
in creating a new route. On the Edit screen highlight and select REMOVE to
delete a waypoint, INSERT to insert a waypoint or DONE to save changes
and return to Route screen .
Details Option
Highlight and select DETAILS to see any or all of the waypoints of a specific
route you have planned. Highlight and select OK to return to main Nav Data page.
Creating a New Route
To create a new route consisting of up to 50 waypoints:
), you can use your
1. From the Nav Data page, highlight using the ZOOM IN/OUT button and
select ROUTE
NEW . A screen displaying OVERWRITE EXISTING? appears
2. Highlight and select YES
first field already highlighted
3. Select that blank field
stored appears
4. Highlight and select SELECT
into your route. You can sort or search the list (see "Sort" and "Search,"
page 16).
Go to Table of Contents
, by pressing the ENTER button. Highlight and select
.
. A blank NEW ROUTE list appears with the
.
. A list of all the waypoints you currently have
.
. Highlight the waypoint you want to put
continued
2.4
N AV D ATA PA G E
Routes: Creating New
Nav Data Route Page
Page
Overwrite Display New
Existing Route Route List
Display
Waypoints
22