Kenmore Intuition BU4050 Use & Care Manual page 22

HEPA MEDIA EXHAUST FILTER CLEAN IN G
2. Remove the HEPA media exhaust filter
from vacuum cleaner.
3. W ash with cold water only, DO N O T
use detergent or soap. Allow to air dry.
Allow parts to dry 24 hours before
putting back into vacuum cleaner.
N OTE:
DO N O T operate without post-
motor filter installed.
DO N O T wash in the dishwasher.
DO N O T install the filter if damp.
4. Reinstall the HEPA media exhaust filter
into the vacuum cleaner.
5. Insert the exhaust filter cover tabs into
the upper slots and lock the exhaust
filter cover into place by pressing the
release tab under the cover until a click
is heard.
HEPA
M edia
Exhaust
Filter
N OTE:
cover is properly installed.
- 22 -
M ake sure the exhaust filter
Slots
Tabs