Siemens SIMATIC S7-1500R/H Equipment Manual page 11

New functions
Synchronization module up to 40 km
Data block functions
Network management protocol SNMP: A
simple configuration option is now available
for using SNMP services. For new configura­
tions, this is disabled by default in accord­
ance with "Security-by-Default".
Trace: The S7-1500 CPU supports up to 64
configured signals per trace.
New functions of the CPU in firmware version V2.9
New functions
Influence switchover time
of switched S1 devices
MRP interconnection
CPU 1517H-3 PN (6ES7517-3HP00-0AB0)
Equipment Manual, 11/2022, A5E42011886-AD
Customer benefits
As of FW version V3.0, a new synchronization
module Sync Module 1 GB FO 40 km is avail­
able. The synchronization module enables a
distance of up to 40 km between the two H-
CPUs via optical fibers. This allows you to use
the S7-1500H redundant system for long tun­
nel installations.
As of FW version V3.0, the instructions for the
data block functions are supported:
• CREATE_DB (create data block)
• READ_DBL (read from data block in the
load memory)
• WRIT_DBL (write to data block in load
memory)
• DELETE_DB (delete data block)
Can be enabled/disabled in the CPU properties.
Community strings can be configured.
Number of configurable signals per trace
extended
Customer benefits
As of FW version V2.9, you can influence the
switchover time between disconnection and return of
switched S1 devices after a failure/STOP of the primary
CPU.
This function offers the following advantages:
• Optimization of the switchover time between dis­
connection and return of switched S1 devices
The MRP interconnection procedure is an extension of
MRP. MRP interconnection enables the redundant
coupling of 2 or more rings with MRP in PROFINET net­
works.
MRP interconnection offers the following advantages:
• When setting up redundant network topologies,
there is no limitation to the maximum number of
devices of 50 devices in a ring.
• Monitoring of larger topologies with ring redund­
ancy.
Product overview
3.1 New functions
Where can I find informa­
tion?
S7-1500R/H System Manual
(https://support.industry.
siemens.
com/cs/ww/en/view/10975483­
3)
STEP 7 online help
Communication Function
Manual
(https://support.industry.
siemens.
com/cs/ww/en/view/59192925
)
Using the Trace and Logic Ana­
lyzer Function Function Manu­
al
(http://support.automation.
siemens.
com/WW/view/en/64897128)
Where can I find information?
PROFINET Function Manual
(http://support.automation.siemens.
com/WW/view/en/49948856)
11