Connection To Control Unit - Record BDE-D-KTA User Manual

3.2

Connection to control unit

NOTICE
This chapter is intended for service personnel.
Connection to the CAN bus
CAN adapter
Connect the connecting cable to the CAN connection and connect it to the CAN connection of the controller (wires
twisted in pairs).
DIP switches (S1-1, S1-2) must be set before connection! These are set to ON at the factory.
ON=CAN-C: CAN termination closed
(Optional) Can an operating lock be integrated via J2, e.g. for key switch. Equipped with a wire bridge at the fact-
ory.
Wire colours
ws:
br:
BAL_BDE-D-KTA_EN_1V1_REC_102-903401276
white
brown
BDE-D-KTA
gn:
ge:
Description
green
yellow
13 / 20
3