Airmotiv Xs10 - Emotiva Airmotiv XS User Manual

AIRMOTIV XS SUBWOOFERS

Airmotiv XS10

The Airmotiv XS10 is the ideal way to extend the bass
response of your audio system to cover the last few critical
octaves of bass with authority and finesse. The XS10 can
deliver the raw power you need to add that final touch of
realism to a movie, while still offering the low distortion and
precise control you need for accurate, superb sounding
music reproduction. The Airmotiv XS10 delivers slightly
less low bass output than the XS12, but its smaller footprint
makes it the ideal solution for installations where space is
at a premium.
Driver Complement
Driver: 10" heavy duty long throw subwoofer with cast
aluminum frame, 2" copper voice coil, non-pressed paper
cone reinforced with aramid fibers, tough SBR rubber
surround, vented pole piece, and forced air cooling.
Cabinet tuning: Rear tuned slot port.
Cabinet
Heavily braced acoustically inert HDF cabinet with
removable sculpted fabric-covered grill. The front bezel is
finished in several coats of satin finish black lacquer; the
sides and rear are covered in tough attractive textured
vinyl.
Electronics
Amplifier type: Audiophile quality Class A/B amplifier.
Amplifier power: 350 Watts RMS.
Protection: Advanced multi-stage low-distortion limiter.
Frequency response: 26 Hz - 200 Hz (+/- 3 dB).
Inputs: Single XLR balanced input; summed left and right
RCA unbalanced inputs.
Controls: Crossover, Phase, Volume, LF Boost.
AC power: 115 VAC/60 Hz or 230 VAC/50 Hz.
Mechanical
Dimensions: 17-1/4" high x 14-1/4" wide x 17-1/2" deep
(feet included; leave extra room for heat sink and cables).
Weight: 66 pounds (boxed).
.
Feet: Permanently attached anti-slip rubber feet
Page 12