Table of Contents
Advertisement
Quick Links
This guide details installation process for WT210 WiHART sensors. It assumes the user is familiar with
the operation of the IK200 installation kit.
Refer to User guide - IK200 installation kit for more detailed usage instructions.
Refer to Overview - WT210 WiHART system deployment for the full list of system documentation.
Table of contents
Safety notices ..................................................................................................................................................................... 2
Compatibility ..................................................................................................................................................................... 2
Technical background....................................................................................................................................................... 2
Installation requirements ................................................................................................................................................. 4
Task 1. Mounting the sensor ........................................................................................................................................... 5
Task 2. Mechanical installation and validation procedure .......................................................................................... 7
Task 3. Completing sensor installation ......................................................................................................................... 8
Task 4. Fitting the lanyard ............................................................................................................................................... 9
Re-installing a sensor (if required) ............................................................................................................................... 10
Re-provisioning a sensor (if required) ......................................................................................................................... 10
Maintenance ..................................................................................................................................................................... 11
1
Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK
www.permasense.com
Installation guide - WT210 WiHART sensors
permasense.support@emerson.com
+44 20 3002 0922
Advertisement
Table of Contents
Related Manuals for Permasense WT210 WiHART
Summary of Contents for Permasense WT210 WiHART
-
Page 1: Table Of Contents
Installation guide - WT210 WiHART sensors This guide details installation process for WT210 WiHART sensors. It assumes the user is familiar with the operation of the IK200 installation kit. Refer to User guide – IK200 installation kit for more detailed usage instructions. -
Page 2: Safety Notices
Permasense WT210 WiHART sensors are compatible with Emerson 1420, 1410, 1410D & 781 fieldlink gateways with the HART-IP order option, and the Permasense GC20 turnkey WiHART gateway. Permasense BP10 and BP20 power modules can be used but note that they have a narrower ambient temperature range than the recommended BP10E and BP20E. - Page 3 The gateway manages this mesh, selecting the best path to transmit data from each sensor to the gateway. The gateway then delivers this data to the Permasense database. Data from all sensors can be viewed by the end user via the Permasense Data Manager Browser interface. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com...
-
Page 4: Installation Requirements
5Nm Deep socket, 6-point. 13mm, 3/8" drive 3/8" drive extension bar, 8" Hey key, 2.5mm Telescopic inspection mirror Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com +44 20 3002 0922... -
Page 5: Task 1. Mounting The Sensor
MAC address is a unique 16 digit hexadecimal (numbers 0-9 and letters A-F) number used to identify sensors. Sensor ID is an easy to work with 4 character Permasense unique ID used to identify the sensor in Data Manager. The sensor ID and MAC addresses may be found on the sensor label. - Page 6 9. Carefully secure the sensor in this position by finger tightening each nut. Rocking the sensor back and forth while finger tightening the nuts can help to ensure both waveguide tips are well seated and fully contacting the pipe surface. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com...
-
Page 7: Task 2. Mechanical Installation And Validation Procedure
Note: The sensor foot must remain parallel to the pipe wall contact point - ensure nuts are ONLY tightened incrementally as described below. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com +44 20 3002 0922... -
Page 8: Task 3. Completing Sensor Installation
4. To protect the sensor from high levels of radiated heat, install the circular stainless steel heat shield. At insulated locations the heat shield can be fixed to the insulation jacket. See the document Guidelines - Re-insulation of lines following sensor installation. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com... -
Page 9: Task 4. Fitting The Lanyard
Note. The wire can be released from the cable lock using the release key. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com +44 20 3002 0922... -
Page 10: Re-Installing A Sensor (If Required)
3. On straight pipes, ensure the studs are perpendicular to the sensor contact point. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com +44 20 3002 0922... -
Page 11: Maintenance
See Installation guide - BP series power module if the power module requires changing. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com +44 20 3002 0922 Revision 8, 24/02/2020 © Permasense Ltd. Permasense is a registered trademark of Permasense Ltd.