Table of Contents
Advertisement
Quick Links
This guide details the installation process for ET410 WiHART sensors. It assumes the user is familiar
with the operation of the IK220 installation kit.
Refer to User guide - IK220 installation kit for more detailed usage instructions.
Refer to Overview - ET410 WiHART system deployment for the full list of system documentation.
Table of contents
Safety notices ............................................................................................................................................... 2
Compatibility ................................................................................................................................................ 2
Technical background ................................................................................................................................... 2
Installation requirements ............................................................................................................................. 3
Task 1. Mounting the sensor ......................................................................................................................... 4
Task 2. Fitting the lanyard ............................................................................................................................. 7
Task 3. Provisioning the sensor on the radio network ................................................................................... 8
Task 4. Completing sensor installation .......................................................................................................... 9
Task 5. Sealing the cladding .......................................................................................................................... 9
Re-installing a sensor (if required) .............................................................................................................. 10
Re-provisioning a sensor (if required) ......................................................................................................... 10
Maintenance .............................................................................................................................................. 10
1
Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK
www.permasense.com
Installation guide - ET410 WiHART sensors
permasense.support@emerson.com
+44 20 3002 0922
Advertisement
Table of Contents
Related Manuals for Permasense ET410 WiHART
Summary of Contents for Permasense ET410 WiHART
-
Page 1: Table Of Contents
Installation guide - ET410 WiHART sensors This guide details the installation process for ET410 WiHART sensors. It assumes the user is familiar with the operation of the IK220 installation kit. Refer to User guide – IK220 installation kit for more detailed usage instructions. -
Page 2: Safety Notices
Ensure the device is installed with an antenna separation distance of at least 20cm (8”) from all persons. Potential electrostatic charging hazard - do not rub or clean with a dry cloth. Compatibility ET410 WiHART sensors can be used in networks with other WirelessHART devices, including Permasense ET210, ET310 and WT210 sensors. Technical background... -
Page 3: Installation Requirements
The gateway manages this mesh, selecting the best path to transmit data from each sensor to the gateway. The gateway then delivers this data to the Permasense database. Data from all sensors can be viewed by the end user via the Permasense Data Manager browser interface. -
Page 4: Task 1. Mounting The Sensor
To avoid damage, and to get the precise location for each sensor, initially place the sensor at an angle to the pipe… Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com... - Page 5 Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com +44 20 3002 0922...
- Page 6 15. Hammer the strap flat against the buckle, Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com +44 20 3002 0922...
-
Page 7: Task 2. Fitting The Lanyard
3. Feed the end of the lanyard into the cable lock and push the lock up the lanyard. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com +44 20 3002 0922... -
Page 8: Task 3. Provisioning The Sensor On The Radio Network
3. Check sensor can hear the network 2. Record the installation location, sensor ID, MAC address of the sensor, and power module serial number. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com +44 20 3002 0922... -
Page 9: Task 4. Completing Sensor Installation
5. Fix the heatshield in place with suitable pop rivets or screws. 6. Apply further sealant where necessary to ensure the sensor and cladding are well sealed. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com... -
Page 10: Re-Installing A Sensor (If Required)
See Installation guide - BP series power module if the power module requires changing. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com +44 20 3002 0922 Revision 3, 31/05/2019 © Permasense Ltd. Permasense is a registered trademark of Permasense Ltd.