Table of Contents
Advertisement
Quick Links
Installation guide - ET310 WiHART sensors
This guide details the installation process for ET310 WiHART sensors. It assumes the user is familiar
with the operation of the IK220 installation kit.
Refer to User guide - IK220 installation kit for more detailed usage instructions.
Refer to Overview - ET310 WiHART system deployment for the full list of system documentation.
Table of contents
Safety notices ..................................................................................................................................................................... 2
Compatibility ..................................................................................................................................................................... 2
Technical background....................................................................................................................................................... 2
Installation requirements ................................................................................................................................................. 3
Task 1. Mounting the sensor ........................................................................................................................................... 4
Task 2. Fitting the lanyard ............................................................................................................................................... 8
Task 3. Provisioning the sensor on the radio network ............................................................................................ 10
Task 4. Completing sensor installation ....................................................................................................................... 10
Task 5. Sealing the cladding ........................................................................................................................................... 11
Re-installing a sensor (if required) ............................................................................................................................... 12
Re-provisioning a sensor (if required) ......................................................................................................................... 12
Maintenance ..................................................................................................................................................................... 12
1
Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK
www.permasense.com
permasense.support@emerson.com
+44 20 3002 0922
Advertisement
Table of Contents
Related Manuals for Permasense ET310 WiHART
Summary of Contents for Permasense ET310 WiHART
-
Page 1: Table Of Contents
Installation guide – ET310 WiHART sensors This guide details the installation process for ET310 WiHART sensors. It assumes the user is familiar with the operation of the IK220 installation kit. Refer to User guide – IK220 installation kit for more detailed usage instructions. -
Page 2: Safety Notices
Potential electrostatic charging hazard - do not rub or clean with a dry cloth. Compatibility ET310 WiHART sensors can be used in networks with other WirelessHART devices, including Permasense and Rosemount WT210, ET210 and ET410 sensors. Compatible with Emerson Wireless 1410 and 1420 Gateways. -
Page 3: Installation Requirements
The gateway manages this mesh, selecting the best path to transmit data from each sensor to the gateway. The gateway then delivers this data to the Permasense Data Manager software, which the end user can use to view the data in a browser. -
Page 4: Task 1. Mounting The Sensor
Alternative shoe – if the sensor is to be installed on a pipe with a diameter less than 4”, an alternative shoe should be ordered which is designed to fit to small diameter pipes. Please consult Permasense. Task 1. Mounting the sensor Note: Two people are required for this operation. - Page 5 (at least 5 turns of the worm-screw is required). Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com +44 20 3002 0922...
- Page 6 If there are obstructions which do not allow for the recommended strap tensioner position relative to the sensor, then move the strap tensioner away from the sensor to the closest accessible position. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com...
- Page 7 Do not over-tighten the worm-screws. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com...
-
Page 8: Task 2. Fitting The Lanyard
For sensors in close proximity to each other, a single lanyard may be used. 2. Thread the bare end of the wire through the loop in the lanyard to secure it to the pipe. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com... - Page 9 Feed the lanyard wire through the cable lock to minimize the slack in the wire. Note: The lanyard wire can be released from the cable lock using the release key. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com +44 20 3002 0922...
-
Page 10: Task 3. Provisioning The Sensor On The Radio Network
10 to 12 from task 1 to reinstall sensor in the new position. Once the sensor is safely reinstalled on the pipe, wait 20 seconds before assessing the waveform quality for the new location. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com... -
Page 11: Task 5. Sealing The Cladding
1. Re-pack the cavity around the sensor with insulation 2. Replace the cladding around the sensor and strap. 3. Apply sealant where necessary to ensure the sensor and cladding are well sealed. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com... -
Page 12: Re-Installing A Sensor (If Required)
See Installation guide - BP series power module if the power module requires changing. Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK www.permasense.com permasense.support@emerson.com +44 20 3002 0922 Revision 7, 26/10/2020 © Permasense Ltd. Permasense is a registered trademark of Permasense Ltd.