Table Of Contents; Before Using Hood; Features - Viking VWH3610MS Use & Care Manual

Table of Contents

Getting Started
Before Using Hood ________________________________ 7
Features ___________________________________________ 7
Heat Sensor Thermostat _______________________ 7
Product Controls/Operation
Settings and Functions ____________________________ 8
Professional Hood Operation __________________ 8
Designer Hood Operation _____________________ 9
DCH Model Operation _________________________ 10
Using Outdoor Hood __________________________ 10
Product Care
Cleaning and Maintenance ________________________ 11
Baffle Filters ___________________________________ 11
Mesh Filters ___________________________________ 13
Charcoal Filters ________________________________ 13
Hood Canopy _________________________________ 14
Enamel Finish __________________________________ 14
Stainless Steel Finish ___________________________ 14
Brass Parts _____________________________________ 15
Ductless Venting Chamber _____________________ 15
Light Bulbs ____________________________________ 15
Service Information ________________________________ 16
Professional Hood Warranty _______________________ 17
Designer Hood Warranty __________________________ 18
6

Before Using Hood

Although the hood is cleaned upon completion of the
manufacturing process, you will probably need to clean your
hood again after installation. Wipe the surface of the hood
with a good household cleaner applied with a soft cloth, or
stainless steel polish, depending on the finish of your hood.
This will leave a protective finish on the hood.

Features

Heat Sensor Thermostat (Designer Hoods Only)
Your hood is equipped with a heat sensor thermostat. The
thermostat will turn on or speed up the blower if it senses
excessive heat above the cooking surface. When the sensor
activates, the letters "HOT" will appear on the display. If the
blower is OFF - the sensor turns the blower on to HIGH
speed. If the blower is on at a lower speed setting - the
sensor turns the blower up to HIGH speed. When the
temperature level drops to normal, the blower will return to
its original setting and the display will be cleared.
C UTION
If the power to the hood is not disconnected during cleaning,
the heat sensor thermostat can cause the blower to turn on.
7