AUDIOropa PRO LOOP NX7 User Manual page 19

1 2 3
1 Power-LED - Indicates operation
2 IN 1: For adjusting the Mic/Line level of input 1
3 IN 2: For adjusting the Mic/Line level of input 2
4 IN 3: For adjusting the 100V level of input 3
5 Compression: Display of the level reduction in dB, in relation to the input signal
6 MLC (Metal Loss Correction) Compensation of frequency response due to metal
influence in the building
7 Overload indicator »Protect / Clip«-LED (red) for loop
»Loop«-LED (yellow) Error indicator for loop
8 Loop current regulator
9 Loop output level display
10 Headphone output for monitoring the outgoing audio signal
5
4 6
7 9
8 10
English 19