AUDIOropa PRO LOOP NX7 User Manual page 17

1. Introduction
Thank you for having purchased the »PRO LOOP NX7« Class D loop driver!
Please take a few moments to read this manual. It will ensure you the best use of the pro-
duct and many years of service.
2. PRO LOOP NX7
2.1 Description
The PRO LOOP NX series consists of Class D loop drivers made to equip rooms with au-
dio support for people with hearing loss.
2.2 Performance range
The »PRO LOOP NX7« belongs to a generation of induction loop drivers with high perfor-
mance and efficiency. With this device it is possible to establish installations according to
the international standard IEC 60118-4.
2.3 Contents of package
Please check if the following pieces are included in the package:
- PRO LOOP NX7 induction loop driver
- Power cable 1.5 m, connectors CEE 7/7 - C13
- 2 pieces 3-point Euroblock-connectors
- 1 piece 2-point Euroblock-connectors, input
- 1 piece Neutrik NL4FX speakON cable socket for loop output
- Mounting screws
- Adhesive loop-indication signs
Should any of these items be missing, please contact your retailer.
English 17