Advertisement
13 Place Dishwasher
(Stainless Steel / Dark Stainless Steel)
Loading
• Open the door of the dishwasher and load the lower basket first, then the upper basket, pulling each
drawer out for ease of access. Add dishwasher detergent and rinse aid (if applicable) according to the
instructions.
• Close the dishwasher door, before pressing the POWER button [
• Select the desired wash program by pressing the PROGRAM button [
program code is shown on the display screen (see pages 14-15 of the instruction manual , then press the
START/PAUSE button [
currently occurring (washing [
Wash stage
indicators
PROGRAM
button
Display
screen
Instructions
• Before starting the desired program, you can also set a number of extra features to customise your wash
cycle.
• DELAY [
]: Press this button repeatedly to set a delay start time of up to 19 hours, in one-hour
increments. The corresponding indicator light (above the DELAY button) will illuminate. The delay time will
appear on the display screen.
• HALF LOAD: This option will shorten the durations of the selected programs to reduce power and water
consumption, and is ideal for smaller loads of dishes. Press the OPTION button [
The corresponding indicator light [
• TABLET FUNCTION: If you are using combined detergents that contain salt, rinse aid or extra features,
press the OPTION button for the second time and activate the tablet function. The corresponding
indicator light [
] will illuminate.
• HYGIENE: Press the EXTRA button once to activate this function, which will change the washing
temperature and durations of the current program for a more sanitary wash. The corresponding indicator
light [
] will illuminate.
• EXTRA RINSE: Press the EXTRA button again to activate this function, which will add extra rinses to the
selected program. The corresponding indicator light [
• EXTRA DRY: Press the EXTRA button again to activate this function, which will extend the program's
drying time. The corresponding indicator light [
• NOTE: The HYGIENE and EXTRA DRY functions cannot be selected at the same time.
] . The wash stage indicators will illuminate to show which part of the cycle is
], rinsing [
START/PAUSE
button
] will illuminate.
Hope you enjoy your new Hoover
dishwasher!
] on the control panel.
] repeatedly, until the desired
], drying [
] and end [
Function
indicators
EXTRA
button
DELAY
button
] will illuminate.
]: will illuminate.
HV-D13SS /
HV-D13DSS
]).
Power
indicator
Rinse aid
indicator
OPTION
button
POWER
button
] once to activate it.
Advertisement
