Related Manuals for Electrolux Professional thermaline M H D FO Series
Summary of Contents for Electrolux Professional thermaline M H D FO Series
- Page 1 Electric frytop EN-US Installation and Operating manual 599A0UK00 - 82.8090.11- 2021.03...
- Page 2 Foreword Read the following instructions, including the warranty terms before installing and using the machine. Visit our website www.electroluxprofessional.com and open the Support section to: Register your product Get hints & tips of your product, service and repair information The installation, use and maintenance manual (hereinafter Manual) provides the user with information necessary for correct and safe use of the machine (or “appliance“).
-
Page 3: Table Of Contents
Contents A WARNING AND SAFETY INFORMATION....................5 General information ........................5 Personal protection equipment ......................6 General safety ..........................6 General safety rules ........................7 Safety signs to be placed near the machine area ................. 8 Transport, handling and storage ...................... 9 Installation and assembly ....................... - Page 4 OPERATING INSTRUCTIONS ....................... 28 Use ............................28 I.1.1 Heating zones ........................28 Features ........................... 28 Glass display ..........................28 Steel display..........................28 Main switch (optional) ........................29 First use ........................... 29 Temperature control ........................29 Switching on-off ......................... 29 Stand-by mode .......................... 29 I.10 Handrail (optional) ........................
-
Page 5: Awarning And Safety Information
WARNING AND SAFETY INFORMATION General information To ensure safe use of the machine and a proper understanding of the manual it is necessary to be familiar with the terms and typographical conventions used in the documentation. The following symbols are used in the manual to indicate and identify the various types of hazards: WARNING Danger for the health and safety of operators. -
Page 6: Personal Protection Equipment
Personal protection equipment Summary table of the Personal Protection Equipment (PPE) to be used during the various stages of the machine's service life. Stage Protective Safety Gloves Glasses Safety garments footwear helmet ● ○ ○ — — Transport — ● ●... -
Page 7: General Safety Rules
• The A-weighted emission sound pressure level does not exceed 70 dB(A). • Turn the appliance off in case of fault or poor operation. • Do not use products (even if diluted) containing chlorine (sodium hypochlorite, hydrochloric or muriatic acid, etc.) to clean the appliance or the floor under it. •... -
Page 8: Safety Signs To Be Placed Near The Machine Area
To preserve these conditions, the areas around the machine must always be: – kept free of obstacles (e.g. ladders, tools, containers, boxes, etc.); – clean and dry; – well lit. For the Customer's complete information, the residual risks remaining on the machine are indicated below: such situations are deemed improper and therefore strictly forbidden. -
Page 9: Transport, Handling And Storage
Prohibition Meaning Keep the area around the appliance clear and free from combustible materials. Do not keep flammable materials in the vicinity of the appliance Install the appliance in a well-ventilated place to avoid the creation of dangerous mixtures of unburnt gases in the same room Danger Meaning... -
Page 10: Electrical Connection
Electrical connection Before connecting, make sure the mains voltage and frequency match those indicated on the appliance data plate. • Work on the electrical systems must only be carried out by specialised personnel. • Connection to the power supply must be carried out in compliance with the regulations and provisions in force in the country of use;... -
Page 11: Reasonably Foreseeable Improper Use
– go over all stainless steel surfaces vigorously with a cloth moistened with paraffin oil in order to create a protective film. • In case of electrical permanent connection: the device must be lockable in the open position and accessible even after the appliance is installed in its place. A.11 Reasonably foreseeable improper use Improper use is any use different from that specified in this manual. -
Page 12: Machine Disposal
Preventive maintenance • In order to ensure the safety and performance of your equipment, it is recommended that service is undertaken by Electrolux Professional authorised engineers every 12 months, in accordance with Electrolux Professional Service Manuals. Please contact your local Electrolux Professional Service Centre for further details. -
Page 13: Ctechnical Data
This instruction manual contains information relevant to various appliances. The product images in this guide are only an example, are not in scale and vary from the base of the model. See the data plate located in the lower right corner to identify the appliance (see fig. below). Electrolux Professional AG Allmendstrasse 28 CH-6210 Sursee... -
Page 14: Testing / Certification
Children shall not play with the appliance. Cleaning and user port personnel. maintenance shall not be made by unauthorised personnel. Manufacturer Electrolux Professional SpA or any other service centre authorised by Electrolux CAUTION Professional SpA. The machine is not suitable for installation... -
Page 15: Responsibility
Protection safety measures consisting of the use of Polyethylene devices specific technical means (guards and safety devices) for protecting operators • Outer wrapping against risks. • Instructions bag Guard an element of a machine used in a specific way to provide protection by means of a Polypropylene physical barrier. -
Page 16: Transport
• make sure no material can fall during lifting. Manoeuvre CAUTION vertically in order to avoid impacts; • handle the machine, keeping it at minimum height from the ground. The machine must only be transported, handled and stored by specialised personnel, who must have: For correct and safe lifting operations: •... -
Page 17: Installation And Connection Diagram
4. Against the wall on concrete plinth 5. Back to back 63 / 67 / 71 in 1600 / 1700 / 1800 mm 31,5 / 33,5 / 35,4 in 31,5 / 33,5 / 35,4 in 31,5 / 33,5 / 35,4 in 800 / 850 / 900 mm 800 / 850 / 900 mm 800 / 850 / 900 mm... - Page 18 Wall mounted appliances 20 mm 50 mm 50 mm 0,79 in 1,97 in 1,97 in 100 mm 3,94 in 100 mm 3,94 in 130 mm / 5,12 in EI = Electrical connection EQ = Potential equalisation 33,46 15,75 11,81 7,87 7,87 35,43 33,46...
- Page 19 +100/+200 45 mm 1,77 in 78 mm 78 mm 3,07 in 3,07 in 150 mm 130 mm 5,91 in 5,12 in +100/ +200 45 mm 1,77 in EI = Electrical connection EQ = Potential equalisation (x)* = Protective panel 31,5 27,95 26,3 23,03...
-
Page 20: Accessing The Appliance's Internal Components
Accessing the appliance’s internal components Access to main power connection INSTALLATION AND ASSEMBLY Appliance type Installation options: 1. Wall mounted (not available for all appliances) 2. Standing against the wall • on adjustable feet • on steel plinth • on concrete plinth 3. -
Page 21: Distances / Walls
Distances / walls Before installation The appliance must not be installed on flammable walls. If an Depending on your model, prepare the following before the appliance is set up next to or against temperature-sensitive appliance is installed and positioned correctly: furniture or similar, keep a safety-distance of approximately 50 •... -
Page 22: Securing Or Adjusting To The Floor (Optional)
3. Shift the appliance onto the transport pallet such that all of the installation connections lie within the appliance. 4. Tip the appliance until it is standing on the floor. Then lift at the front and remove the transport pallet. 5. -
Page 23: Positioning
G.5.3 Positioning We recommend using a lifting truck with a stable shelf to take the unit down from the transport pallet and position it into place. Lifting the unit onto the hand truck has to be done by hand, with two or more men required depending on the unit size. 1. -
Page 24: Side Panels And Base Models
Using a solid tool, break nuts C from connecting rail D. Seal the whole length of the joint with long lasting Insert connecting rail D into the gap between the top, silicone (we recommend grey junction sealing, making sure marking E is pointing forwards. code: 059611). -
Page 25: Fixing The Side Panels
Available for appliance Height Width depth (mm, inch) inch inch 31,5″ 33,5″ 35,4″ 100 mm 300 – 2500 mm ● ● 3,94″ 11,81 – 98,43″ Base panel or stainless steel base for mounting back-to-back 200 mm 300 – 2500 mm ●... -
Page 26: Side Cover Without Overhang
Insert the hooks on the bottom of end rail G into the Slide end rail G in the direction of the arrow to align eyelets of the connecting rail. it to the front. G.8.2 Side cover without overhang The side cover should only be used as a closing off against the wall, against a niche and in between appliances (provided that these have the same dimensions). -
Page 27: Sealing
Insert the hooks on the bottom of end rail F into the Slide end rail F in the direction of the arrow to align eyelets of the connecting rail. it to the front. Attach the side of side cover E using the 4 flathead screws supplied. -
Page 28: Potential Equalisation
WARNING When installing multiple appliances, connect them all together through potential equalisation. If the power cable is damaged, it must be replaced by the Cus- 1. 6 mm lug tomer Care Service or in any 2. M6 nut case by specialised personnel, 3. - Page 29 • GREEN LAMP On / Off 80℃ / 175℉ – Temperature selection lights up when the appliance is switched on 280℃ / 535℉ • RED LAMP Standby Heat On / Off lights up until the operating temperature is reached Switching on-off Main switch (optional) Switch on the appliance: This appliance has a ventilation system that protects electronic...
- Page 30 CAUTION Cooking area Do not use steel brushes, steel wool, • Use a scraper to remove food deposits and stubborn dirt. copper cloths, sand-based or similar prod- Make you do not touch the edge with the scraper, otherwise ucts for cleaning you will scratch the frying surface.
- Page 31 • Clean them with hot water. Add a degreasing detergent if • De-scale the appliance with a solution of 10% vinegar, 10% necessary. phosphoric acid or a suitable de-scaling solution available for purchase. • Rinse thoroughly with clean water. • Never use steel wool or other abrasive materials which can •...
- Page 32 Should none of the measures listed below resolve the fault or if an error occurs that is not described here, disconnect the appliance from the mains supply (gas, water, electricity) and immediately contact the Electrolux Professional Customer Care Service. What to do if...
- Page 34 Electrolux Professional AG Allmendstrasse 28 CH - 6210 Sursee www.electroluxprofessional.com...
Need help?
Do you have a question about the thermaline M H D FO Series and is the answer not in the manual?
Questions and answers