Download Print this page

Honeywell T80 Quick Manual page 7

Handheld terminal (pda)

Advertisement

EQUIPMENT CHARGING
DEVICE CHARGING:
1. Pull out the waterproof USB plug on the right side with the Type-C
USB cable that comes with the device.Insert the Type-C USB cable.
2. Use cradle to charge. (Cradle comes seperately)
1. Battery is fully charged after 4 hours of charging, and the standby
time is over 48 hours.
2. Cradle can charge 1 battery and 1 terminal simultaneously.
3. The left indicator light is the battery charging indicator, when the
battery is charging, it will appear red. Light will display green once
fully charged.
4. The right light is the power on indicator. Green for when power is
on, and indicator is off when power is off.
*
To prevent the battery from being over-consumed, please charge
the device when the battery power is less than 20%. If the battery
displays over-comsumption state, please charge the device for
20-30 minutes. This then will display a normal charging status.
Type-C interface
6

Advertisement

loading