Table of Contents
Advertisement
► Disconnect the system from its voltage supply and secure it
against being switched on again.
► Evenly heat the SENSORswitch and the subsurface using a hot
air fan.
► Remove the SENSORswitch from the subsurface using a glass
scraper.
► Remove all remaining glue residues from the subsurface.
Disposal
Different types of electrical and electronic components must be
recycled according to their type. All applicable statutory, state and
local laws and regulations must be complied with.
Technical specifications
Technical specifications
series4x
Operating voltage
Load current
Reverse polarity protection
Short circuit protection
Voltage drop
Power consumption at 24 V
Operating temperature
Degree of protection IP
Communication interface
Measuring principle
Type of actuation
Actuation force
max. altitude
Relative air humidity
DC 12 - 24 V (8.4 to 31.2 V)
max. 200 mA
Protection of all cables/lines
Protected against short circuit and overload
Max. 2.5 V at 200 mA load current
Max. 90 mA
-25°C (-13°F) to 50°C (122°F)
Front IP69K Maximum unevenness in mounting
surface < 0.2 mm
IO-Link specification V1.1
Capacitive
Touch
No actuation force required
3000 m above standard zero
Max. 95%, non-condensing
Advertisement
Table of Contents
