Table of Contents
Advertisement
General description
The supplied SENSORswitch can have options that differ from
those shown in this manual. This does not affect the function. The
SENSORswitch is equipped with different color LEDs to indicate
operating conditions. The LEDs are actuated differently depending
on the pin configuration.
A
Sensor element with symbol or four-
digit seven-segment display
B
Connection on the back
Assembly
Prepare for assembly
► Disconnect the system from its voltage supply and secure it
against being switched on again.
► Set the desired position of the SENSORswitch and provide a
center hole for the suitable SENSORswitch.
series43"
The product description will indicate the respective
SENSORswitch.
Attaching the SENSORswitch
Requirements: The surface is level and
sustainable.
For optimal gluing results, the surface must
be cleaned thoroughly at the position where
the button will be located.
see "Drilling pattern
Advertisement
Table of Contents
