Behringer iNUKE NU3000 Quick Start Manual page 4
Hide thumbs
Also See for iNUKE NU3000:
- Quick start manual (20 pages) ,
- Features (11 pages) ,
- Overview (6 pages)
Advertisement
8. Apply pressure with soldering iron to FET allowing solder paste to heat up. FET should now be firmly in place.
9. Same again for other FET.
Apply pressure here. Confirm solder
has melted around inner circle and
around edges. This needs to really
be done with a large tip iron and
medium temperate for no longer
than 10 seconds.
Advertisement
