CNET CWP-905 User Manual page 27

Use 802.1x
After you finish all settings, click 'OK' to save settings and exit. The profile you just created will
be displayed:
Select the profile you wish to use, and click 'Activate' to use the profile you selected. You can
only activate a profile a time, and the profile which is activated currently will have a green
check ( ) before its name. If the wireless access point is not reachable, a red check (
will be displayed before its name.
If you want to change the connection parameters of a specific profile, just select it and click
'Edit' button, you'll be prompted to input the connection parameters, just like you're creating a
new profile.
Enable 802.1x wireless authentication. Please click '802.1x Setting'
button to set 802.1x parameters. (See next section).
27
)