Ikelite ULTRAcompact TG-5 Installation Instructions

ULTRAcompact Housing for Olympus Tough
TG-5, TG-6
Product # 6233.06
Included in the Box
•
Housing
•
O-ring # 0132.45 (installed)
•
Port cover # 0200 (installed)
•
Lanyard # 0321.10
•
Silicone lubricant 1cc tube
Important Notices
Do not use alcohol, cleaning agents, spray lubricants,
»
Rain-X, or other solvents on the housing or lens port.
Use of an incompatible chemical compound can
damage the plastic or component o-rings, which may
result in leaking.
Assemble in a cool, dry location. To avoid fogging,
»
do not open in a humid environment. Dry the housing
completely before opening.
Lanyard Mount
The included lanyard is a break-away safety lanyard which is
designed to break if stress is placed on it. This is important
so that the user can break free if the equipment is caught on
something underwater.
The lanyard is not designed to support the weight of the
housing and should not be used as a carrying strap. Carrying
the housing by the lanyard may result in damage to the
lanyard and/or housing.
A different lanyard with a thin cord may be attached to
the housing using the lanyard mount on the corner of the
housing.
Control dial
Lanyard
mount
http://ikelite.com/
watch-6233.06
Installation and Use
Opening the Housing
1.
Latch button
2.
3.
Zoom
Shutter
INFO
Playback
Left
MENU / WiFi
Depress both latch buttons at the same time and rotate
the latch away from the housing.
The back of the housing will be compressed by pressure
underwater or after air travel. Rotate the latch fully to
break the seal of the housing. Do not use metal objects or
tools to pry the back open.
Lift the latch up and away from the housing.
Power
Lens port
Fiber optic
ports
Tray mounts
Movie
Mode dial
Up / Exp
Comp
Right / Flash
OK
Down / Erase
Latch
Latch