Hoover HV-LHP8 Quick Start Manual

Hoover HV-LHP8 Quick Start Manual

8 kg heat pump dryer
Hide thumbs Also See for HV-LHP8:

Advertisement

Hoover's quick
& snappy start
up guide.
Let's get your washing
machine up and running!
Welcome to your new Hoover heat pump dryer! We hope that this product brings you many years of
enjoyment.
When unpacking the dryer, make sure to remove both pieces of packaging foam from the drum.
Position your new heat pump dryer in a clean and dry, well ventilated area. The floor must be firm, flat and
stable. Adjust the leveling feet if your floor is slightly uneven. Don't place the dryer on carpet or other soft
surfaces, which could block the air intake. Leave sufficient room at the back for air dissipation.
The dryer produces condensate water which is by default collected in the in-built water container and needs
to be emptied. You can also drain the condensate water directly into a sink, using the external drain hose.
NOTE: Before you use the dryer for the first time, place some clean, damp rags into the drum and run a
complete cycle on the Gentle-Light program for 30 minutes following the instructions in the manual.
For detailed installation instructions, please consult the supplied instruction manual, which also has
comprehensive usage instructions and important safety advice.

Instructions

• Rotate the dial on the control panel to switch on the dryer
and select the desired program (Fig. 1).
• The display screen (Fig. 2) will show the settings, time
remaining, options, codes, etc.
• When using the Gentle-Light program, press the Duration
button to extend the default drying time in 10 minute steps.
• Press the Dry Level button to select the drying level (if the
program allows).
• Press the Anti-Crease button to extend the duration of the
anti-crease phase.
• Press the Delay Start button to set the delay start time
(from 1 to 24 hours).
• Press the Start/Pause button to start or pause a drying
program.
• Optionally, you can also press and hold the Duration and
Dry Level buttons at the same time to set/cancel the child
lock, and/or press and hold the Anti-Crease and Delay Start
buttons at the same time to mute the buzzer.
For details about all drying programs, please
refer to the table on page 16 of the supplied
instruction manual.
8 kg Heat Pump
Dryer
8 kg Heat Pump
Dryer
Model #:
Version #:
After Sales Support
1
2
HV-LHP8
V1.1
1300 886 649
HV-LHP8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HV-LHP8 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hoover HV-LHP8

  • Page 1 Let’s get your washing machine up and running! Welcome to your new Hoover heat pump dryer! We hope that this product brings you many years of enjoyment. When unpacking the dryer, make sure to remove both pieces of packaging foam from the drum.
  • Page 2 • Wash the filter drawer sponge by hand to remove any fibres and lint from the surface. After washing the sponge, squeeze it by hand and remove the excess water. Thoroughly dry the sponge before reinstalling it. • Close the maintenance cover. Hope you enjoy your new Hoover washing machine.

Table of Contents